• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Heater Box Restore - Adhesive Recommendation
#1
To restore the padding on the vent door inside the heater box, I need to adhere the new pads.

Any recommendations on the adhesive to use?

Thanks.
Tim

Thanks

Tim
Tucson, Az
1973 SportsRoof
351C bored .040
Crank .020  and Stock cam
Flattop pistons
Edelbrock 4bbl CARB 800 CFM ELEC CHOKE
Edelbrock Performer 2750 Intake Manifold

[Image: NewPrimedHood_zpsw2jaj0cu.jpg]
  Reply
#2
Almost any adhesive that will not dissolve the foam should work, use sparingly. I used thin double sided foam tape, no mess. Chuck
  Reply
#3
I used some contact adhesive from a spray can when I did mine.

Mike
__________________________________
Black 1985 GT
Yellow 1973 Mustang Mach 1
Black 2012 5.0 GT, 6-speed, Brembo brakes, 3.73's
Wimbledon White 1966 F-100 Shortbed Styleside, 390ci, Tremec 3550, FiTech EFI
  Reply
#4
MeZapU;283043 Wrote:I used some contact adhesive from a spray can when I did mine.

I've used 3M Contact Adhesive spray for these things before as well (package tray carpet, sail panels, headliner, etc.). Spray some onto both facing surfaces, let both get tacky, the stick 'em together. No muss, no fuss.

The stuff can go everywhere, though - mask off anything you don't want sticky. Wink

Eric

[Image: mach1sig2.gif]
  Reply
#5
Mister 4x4;283046 Wrote:
MeZapU;283043 Wrote:I used some contact adhesive from a spray can when I did mine.

I've used 3M Contact Adhesive spray for these things before as well (package tray carpet, sail panels, headliner, etc.). Spray some onto both facing surfaces, let both get tacky, the stick 'em together. No muss, no fuss.

The stuff can go everywhere, though - mask off anything you don't want sticky. Wink

The kit I got from National Parts had all of the pieces that just peeled and stuck in place.
  Reply
#6
Mister 4x4;283046 Wrote:
MeZapU;283043 Wrote:I used some contact adhesive from a spray can when I did mine.

I've used 3M Contact Adhesive spray for these things before as well (package tray carpet, sail panels, headliner, etc.). Spray some onto both facing surfaces, let both get tacky, the stick 'em together. No muss, no fuss.

The stuff can go everywhere, though - mask off anything you don't want sticky. Wink

thumb
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Heater duct install 73429mach 4 313 12-23-2018, 05:28 PM
Last Post: 73429mach
runninpony glove box light switch and light NOT A T5 9 790 07-06-2018, 07:53 PM
Last Post: rackerm
  glove box trim deluxe Copestang 2 482 03-25-2018, 04:16 PM
Last Post: Copestang
  Chrome Dash Trim restore scgamecock 15 1,573 12-05-2017, 11:14 AM
Last Post: 73pony
  Glove Box Striker OzCoupe72 11 1,237 11-18-2017, 04:33 AM
Last Post: rackerm
runninpony Heater Core Non A/C Car NOT A T5 4 881 08-13-2017, 04:30 PM
Last Post: NOT A T5
  Headliner and Interior Trim Adhesive mustang7173 2 666 08-08-2017, 05:24 AM
Last Post: mustang7173
  AC heater box vacuum line diagram mwilson7 3 828 08-02-2017, 09:21 AM
Last Post: mwilson7



Users browsing this thread: 1 Guest(s)