• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Headlight ring fixings
#1
I secured the headlights in place using the chrome trim rings. The black ring that fits over the top of that is fixed with one screw at the top of the ring that i can see.
There are white plastic pieces there at the moment. However, one seems to hold the screw and the other does not the screw. Not sure if either are correct
Can someone post a picture of the fixing that the screw screws into.

Steve
1971 Grandé
  Reply
#2
What year car is it? Sounds like you have a 71, since the grill, headlight bucket and trim ring setup is different than later years. A suggestion... add the car year and model to your signature.

Edit: I should clarify my grill and model year remark above...

1971 and 72 grill and headlight setup is basically the same. That is Bumpers, Bumper Mounts, Valance, Fenders, and Outer Headlight Bezel Ring are the same for 71 and 72, but changes were made in 1973. In 73 the bumper mounts, bumper, and fenders were changed to meet the new federal 5 mile an hour bumper regulations, consequently the outer headlight bezels were eliminated, the grill components, and valence were also changed and are unique to the 73 model year.

I was a bit too "shorthand" in my remark. I should have been more specific.
  Reply
#3
Sorry Rackerm. Mine is a 71 Grandé

Steve
1971 Grandé
  Reply
#4
Anyone got a picture of the fixing that the screw screw into for the 71

Steve
1971 Grandé
  Reply
#5
Not much to see ON a car ! (Do you need to see an NOS grill too?)
[Image: 6395_AB1_F_2_CFB_4014_850_B_784595302627.jpg]
  Reply
#6
(06-13-2018, 06:54 AM)SVO2SCJ Wrote: Not much to see ON a car !  (Do you need to see an NOS grill too?)
[Image: 6395_AB1_F_2_CFB_4014_850_B_784595302627.jpg]

I replaced the grill with a repro. Are those fixings available repro?

Steve
1971 Grandé
  Reply
#7
IF you want to spend $30 .................AMK kit D1ZB-259 (might be able to get at NPD cheaper)

Where are you located? Exact address. (I have to ship D1ZX alum water pumps to Australia today, might was well do a package to EU !

Mark
  Reply
#8
(06-13-2018, 07:18 AM)SVO2SCJ Wrote: IF you want to spend $30 .................AMK kit D1ZB-259 (might be able to get at NPD cheaper)

Where are you located?  Exact address.   (I have to ship D1ZX alum water pumps to Australia today, might was well do a package to EU !

Mark

Sent
  Reply
#9
(06-13-2018, 04:16 PM)SVO2SCJ Wrote:
(06-13-2018, 07:18 AM)SVO2SCJ Wrote: IF you want to spend $30 .................AMK kit D1ZB-259 (might be able to get at NPD cheaper)

Where are you located?  Exact address.   (I have to ship D1ZX alum water pumps to Australia today, might was well do a package to EU !

Mark

Sent

Bill those fixings arrived today. Thank You for taking the time and effort to help

Steve
1971 Grandé
[+] 1 user Likes Pegleg's post
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Proper headlight adjustment Tnfastbk 5 208 08-28-2018, 09:05 AM
Last Post: Don C
  '71 Mach 1 outer headlight trim rings bac 7 470 04-18-2018, 07:49 PM
Last Post: bac
  Headlight Switch Terminals ejnonamaker 22 1,588 02-27-2016, 01:15 PM
Last Post: jbojo
  Proper headlight adjustment imusa76 6 1,924 08-01-2013, 08:16 PM
Last Post: Totalled
  Headlight Wiring Harness wwhite72 8 1,538 06-16-2013, 11:12 AM
Last Post: wwhite72
  Intake Gaskets -> What is the O-ring provided for? SkotTTU 3 1,134 04-26-2011, 08:52 PM
Last Post: droptop73
  ring gap alignment not2old 4 1,642 03-31-2011, 12:28 PM
Last Post: machmeter1



Users browsing this thread: 1 Guest(s)