• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Headers for 351c with 4 speed
#1
In my research I have not found a header that will fit a 351c with a 4 speed. I will be utilizing the stock factory clutch set up. My car is equipped with power steering.
Does anyone know of a header that will fit this application? If so, pros and cons?

Thanks,
klinton994
  Reply
#2
Klinton994,
1971 fb with 351 4v and toploader out of a 1973 model.
I am using patriot H 8413b with no issues, stock z bar and linkage .
also has power steering.
They also fit pretty well when this car had a c4 trans.
Boilermaster
  Reply
#3
Boilermaster
Thank you. I will check those out!

boilermaster;290456 Wrote:Klinton994,
1971 fb with 351 4v and toploader out of a 1973 model.
I am using patriot H 8413b with no issues, stock z bar and linkage .
also has power steering.
They also fit pretty well when this car had a c4 trans.
Boilermaster
  Reply
#4
I'm using Hooker Comps, but I don't have power steering. http://www.cjponyparts.com/hooker-comp-l...gQodky4JSw

I think they hang a little low, but they are serviceable.

I also had mine nitroplated after installing and then removing them - much better protection than buying their ceramic coating and if you have to tweak a tube, you don't have a ruined coating

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
#5
(02-05-2017, 01:19 PM)klinton994 Wrote: In my research I have not found a header that will fit a 351c with a 4 speed. I will be utilizing the stock factory clutch set up. My car is equipped with power steering.
Does anyone know of a header that will fit this application? If so, pros and cons?

Thanks,
klinton994

I have a 71 351c, 4 speed. I have Hooker 6315-H, they are the ceramic coated headers. They fit very well, but I do not have power steering, so depending how the pump and lines hang, that may be a problem, although I wouldn't think it would.

[Image: funny_pictures_pony_mechanic_e1263615472847.png]

  Reply
#6
Jeff73

Is this the header model you have?

Hooker Competition Full Length Header - Painted
71-73 Mustang/Cougar/Falcon/Fairlane/ Torino/Ranchero/Cyclone/Montego: 351C,...

Part# 6921HKR


(02-06-2017, 12:09 PM)Jeff73Mach1 Wrote: I'm using Hooker Comps, but I don't have power steering. http://www.cjponyparts.com/hooker-comp-l...gQodky4JSw

I think they hang a little low, but they are serviceable.

I also had mine nitroplated after installing and then removing them - much better protection than buying their ceramic coating and if you have to tweak a tube, you don't have a ruined coating
  Reply
#7
'yellowmach351
I could not locate that part number on the hooker header web site. Is that an old number? Are yours the completion or super competition model?

thanks


(02-08-2017, 04:52 PM)yellowmach351 Wrote:
(02-05-2017, 01:19 PM)klinton994 Wrote: In my research I have not found a header that will fit a 351c with a 4 speed. I will be utilizing the stock factory clutch set up. My car is equipped with power steering.
Does anyone know of a header that will fit this application? If so, pros and cons?

Thanks,
klinton994

I have a 71 351c, 4 speed. I have Hooker 6315-H, they are the ceramic coated headers. They fit very well, but I do not have power steering, so depending how the pump and lines hang, that may be a problem, although I wouldn't think it would.
  Reply
#8
(02-08-2017, 05:23 PM)klinton994 Wrote: 'yellowmach351
I could not locate that part number on the hooker header web site. Is that an old number? Are yours the completion or super competition model?

thanks
Sorry, my mistake. They are the 6915-1hkr. I had just come in from my shop fighting the top loader !!

(02-08-2017, 04:52 PM)yellowmach351 Wrote:
(02-05-2017, 01:19 PM)klinton994 Wrote: In my research I have not found a header that will fit a 351c with a 4 speed. I will be utilizing the stock factory clutch set up. My car is equipped with power steering.
Does anyone know of a header that will fit this application? If so, pros and cons?

Thanks,
klinton994

I have a 71 351c, 4 speed. I have Hooker 6315-H, they are the ceramic coated headers. They fit very well, but I do not have power steering, so depending how the pump and lines hang, that may be a problem, although I wouldn't think it would.

[Image: funny_pictures_pony_mechanic_e1263615472847.png]

  Reply
#9
No HKR 6915 is the right part number for a 4V

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
#10
i'm using Hedmans with the stock clutch linkage & power steering with no problems, except for the fact that they are for 2v not 4v heads.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Water Temp sender in water pump - 351C TheDude 34 886 06-11-2019, 08:06 PM
Last Post: TheDude
  Circle Track Overheating Issue 351C jdwest711 10 253 06-10-2019, 05:24 PM
Last Post: TommyK
  C6 conversion to Toploader 4 speed Manu Mach1 21 660 06-10-2019, 07:41 AM
Last Post: Manu Mach1
  Headers for 460 BBF ? protouringstang73 11 316 06-09-2019, 07:38 PM
Last Post: B229218
  73 Mach 1 351C w/AC vacuum line DeereFanatic 7 212 05-30-2019, 08:51 AM
Last Post: Don C
  What Headers on a 1973 Mach 1 Q Code 4 speed??? jwmustangman 3 238 05-13-2019, 02:52 PM
Last Post: c9zx
  351c 2v Cam advice ianpala 33 1,419 05-08-2019, 08:05 PM
Last Post: c9zx
  351C EFI don blanchard 13 676 04-28-2019, 11:01 PM
Last Post: detritusmaximus



Users browsing this thread: 1 Guest(s)