Header Fitment Hooker 6915

[jmohring]

If you don't jack the motor up, you have to jack the whole car up about 3 feet on the front.  An extra set of hands is helpful as well.

[Zatherith]

I jacked up the car and then put the car on stands and then jacked the engine up about 2 inches and had to turn the front wheel to get the header to fit.

[Mister 4x4]

What do you all have for H pipes? Anything off the shelf bolt up to these headers?


Sent from my iPhone using Tapatalk

If you're OK with an X-Pipe vs. an H-Pipe, Pypes makes a nice set-up.  I have a Pypes X-Pipe [complete] system on my '71.  I only had to put about 7 degrees bend into the collector/lead pipe to match up to the Hookers. 






Here's a link to the Pypes site for more information: https://pypesexhaust.com/ag-134874.11239...stang.html

Hope this helps!

[cjkcue]

What do you all have for H pipes? Anything off the shelf bolt up to these headers?


Sent from my iPhone using Tapatalk

If you're OK with an X-Pipe vs. an H-Pipe, Pypes makes a nice set-up.  I have a Pypes X-Pipe [complete] system on my '71.  I only had to put about 7 degrees bend into the collector/lead pipe to match up to the Hookers. 






Here's a link to the Pypes site for more information: https://pypesexhaust.com/ag-134874.11239...stang.html

Hope this helps!

Awesome! Thank you very much!


Sent from my iPhone using Tapatalk