• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Have started the long job of cleaning the 73 Mach 1
#31
Since nobody in my family likes cars they will get sold at auction anyway.
Yes the cars will get rotated in and out of the Museum it is not that large, I think 60 cars fit?
If the car were restored the value drops by 50% they are only original once. I am only doing safety related items and cleaning and detailing.
Will see how it goes at the museum. The owner of NPD wants to buy it also. They have quite a collection.
This 1950 Ford is also an odd original car. Never had tires put on has original belts and hoses on engine. I did drive it some until 1997 and job and family took all my time again. This car has 16,000 miles interior is original and all the paint fell off. Sat in a barn in Buffalo NY from 1954 until I got in 1995. Sold for $1,000 at estate auction.
Several judges from AACA have viewed the car and said if it were painted would not be worth as much. Seems to be the fad to have original rusty cars, lol. The moths liked the wool seat covers.
The tag in the trunk was on the car when I got it, 1954.
I did not have to do anything to the engine, even the brake master cylinder and wheel cylinders were not rusty. Still has the factory exhaust also. It has turn signals, rear window wiper and rear window louvers, all were Ford options back then. Did not have a radio. I have 4 of these that will be going somewhere also.
A museum in Gatlinburg Tenn. wants this one.
But yesterday I spent all day with wire brush and sand blast cabinet cleaning the suspension and brake parts. Do not have time to wait on the molasses tank.
Should start going back together with suspension next week.

[Image: 100-2678.jpg]

[Image: DSC-0078.jpg]

[Image: DSC-0079.jpg]

[Image: DSC-0080.jpg]

[Image: DSC-0082.jpg]

[Image: DSC-0084.jpg]

[Image: DSC-0085.jpg]

[Image: DSC-0086.jpg]

[Image: DSC-0088.jpg]


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#32
"A museum in Gatlinburg Tenn. wants this one." 

Which museum? I will be in Pigeon Forge for the rod run in April and September. I would like to check it out.
  Reply
#33
(02-12-2019, 11:59 AM)Tnfastbk Wrote: "A museum in Gatlinburg Tenn. wants this one." 

Which museum? I will be in Pigeon Forge for the rod run in April and September. I would like to check it out.

It is actually the one in Pigeon Forge on the left as you head out to I-40. I forget the name. I also talked with them about the mustang there before the MOM came to be.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#34
(02-13-2019, 11:05 AM)Carolina_Mountain_Mustangs Wrote:
(02-12-2019, 11:59 AM)Tnfastbk Wrote: "A museum in Gatlinburg Tenn. wants this one." 

Which museum? I will be in Pigeon Forge for the rod run in April and September. I would like to check it out.

It is actually the one in Pigeon Forge on the left as you head out to I-40. I forget the name. I also talked with them about the mustang there before the MOM came to be.

Could it be Floyd Garrett's in Sevierville ? I ask because Smoky Mountain Car Museum has been closed down for a bit now.
  Reply
#35
Probably Floyd Garrett's Muscle Car Museum in Sevierville. About 9 miles in from I-40 on hwy 66, on the right side just past the Volunteer Chevrolet dealership. Been there several times and since the collection of cars is constantly changing, each visit is a treat.
If you are ever in the Sevierville, Pigeon Forge, Gatlinburg area you really need to include this place on your list of things to do, you won't be disappointed!   Smile
http://www.musclecarmuseum.com/map.shtml

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#36
(02-06-2019, 06:57 PM)Carolina_Mountain_Mustangs Wrote: [/url]

[Image: DSC-0938.jpg]

[url=https://ibb.co/fv5N6t9]

 David, I "hijacked" this shot for the hood black-out. It clearly shows the shape and from earlier posts with measurements shown, should be a good reference.
But a question; does anybody know for sure if there were any shape changes from the 71 to the 73 on the black-out? We know the 73 got different strips, did anything else change in that regard? Just wondering if someone in the styling dept. thought it needed an up-grade as well.
Thanks for all the updates on this "clean up"
Geoff.

I learn something new every day!
  Reply
#37
It is the Floyd Garrett's Muscle Car Museum in Sevierville that I was referring to. The car is not there it is in my garage now.
I have a couple other hoods I would have to dig out and check the date codes on the stampings. They are both factory applied black out also. I have a 72 with a crunched hood I can measure side to side and width of border and such on to compare also.
I pretty much have most of the front end components cleaned up. The sway bar, strut rods, spindles and disc brake mounts were pretty crusty so I blasted and cleaned them up.
I removed the trim from the vinyl top, and the rear honeycomb panel and the door sill moldings and gave them a polish. I just got no name oven cleaner and after about 6 applications I gave up and went and got Easy Off and it removed the anodize the first coating.
The door sill moldings are not anodized so they polish easily. If you send the moldings off to be polished they get $37.00 per foot but they will come back perfect. Talking with my friend that does high end restorations and he had sent the stainless trim off the 69 HO Firebird he is doing now and I think it was $2,500 to do all the trim. I looked at it and it is perfect for sure. The aluminum will never look like stainless no matter how you polish.
The procedure the professional uses is a follows.
Straightens any dents or bends, riles, stones and sands back flat just like doing body work, glass beads the entire surface. He says this gives you a uniform surface to then start to polish. Then he buffs with compound until like a mirror.
I stripped the anodize, sanded with I believe 1200 to remove the corrosion the use fine steel wool then went to buffer with couple different compounds then hand polished with cream.
So now I need to get the roof rail molding off and windshield and rear window and do them. Can't find my windshield trim remover have not used in years. I will go buy another one and come home that then find the old one, lol.
I went to get the new tires mounted Friday and friend at the tire store was on holiday so I go back on Monday to get them mounted.
Help did not show up yesterday to remove hood and pull engine I need to get that out so I can clean the engine compartment and the engine. So I pulled one of the tail lights so I can get that trim back shiny. At least the 73 does not have the black out.
Since I am cleaning inside the garage I got a kids swimming pool to catch some of the run off. It is mainly just dust no rust and very little oil or grease. When I was out getting cleaning supplies I noticed that Dawn makes a floor cleaning soap so I got some to try.
Went to a couple parts houses and nobody has the master cylinder repair kits only want to sell you a rebuilt cylinder. So I will look for that some online. Might have to buy a rebuilt one and pull the guts out to keep my original in the car. If bad pitted I would send off to get the brass sleeve put in then will never rust again. Might be ok have not removed yet.
Might pull the gas tank today to get a look inside. If not too bad will pour in denatured alcohol and marbles and let them beat the crud loose.
I left camera in garage so no new pics will update later today.
Cold rain here.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#38
David, thanks for your comments on the hood black-out. It will be interesting to know If there were any differences between years. I doubt it, but one never knows with Ford. I think that will settle the discussion once and for all.
Great work on the 73, I love reading about your progress.
Geoff.

I learn something new every day!
  Reply
#39
(02-17-2019, 10:22 AM)Carolina_Mountain_Mustangs Wrote: It is the Floyd Garrett's Muscle Car Museum in Sevierville that I was referring to. The car is not there it is in my garage now.
I have a couple other hoods I would have to dig out and check the date codes on the stampings. They are both factory applied black out also. I have a 72 with a crunched hood I can measure side to side and width of border and such on to compare also.
I pretty much have most of the front end components cleaned up. The sway bar, strut rods, spindles and disc brake mounts were pretty crusty so I blasted and cleaned them up.
I removed the trim from the vinyl top, and the rear honeycomb panel and the door sill moldings and gave them a polish. I just got no name oven cleaner and after about 6 applications I gave up and went and got Easy Off and it removed the anodize the first coating.
The door sill moldings are not anodized so they polish easily. If you send the moldings off to be polished they get $37.00 per foot but they will come back perfect. Talking with my friend that does high end restorations and he had sent the stainless trim off the 69 HO Firebird he is doing now and I think it was $2,500 to do all the trim. I looked at it and it is perfect for sure. The aluminum will never look like stainless no matter how you polish.
The procedure the professional uses is a follows.
Straightens any dents or bends, riles, stones and sands back flat just like doing body work, glass beads the entire surface. He says this gives you a uniform surface to then start to polish. Then he buffs with compound until like a mirror.
I stripped the anodize, sanded with I believe 1200 to remove the corrosion the use fine steel wool then went to buffer with couple different compounds then hand polished with cream.
So now I need to get the roof rail molding off and windshield and rear window and do them. Can't find my windshield trim remover have not used in years. I will go buy another one and come home that then find the old one, lol.
I went to get the new tires mounted Friday and friend at the tire store was on holiday so I go back on Monday to get them mounted.
Help did not show up yesterday to remove hood and pull engine I need to get that out so I can clean the engine compartment and the engine. So I pulled one of the tail lights so I can get that trim back shiny. At least the 73 does not have the black out.
Since I am cleaning inside the garage I got a kids swimming pool to catch some of the run off. It is mainly just dust no rust and very little oil or grease. When I was out getting cleaning supplies I noticed that Dawn makes a floor cleaning soap so I got some to try.
Went to a couple parts houses and nobody has the master cylinder repair kits only want to sell you a rebuilt cylinder. So I will look for that some online. Might have to buy a rebuilt one and pull the guts out to keep my original in the car. If bad pitted I would send off to get the brass sleeve put in then will never rust again. Might be ok have not removed yet.
Might pull the gas tank today to get a look inside. If not too bad will pour in denatured alcohol and marbles and let them beat the crud loose.
I left camera in garage so no new pics will update later today.
Cold rain here.

This thread is worthless without pics...ha ha. Sounds like great progress, can't wait to see.

Jeff
1972 Q Code Convertible
  Reply
#40
Looking forward to seeing the mustang all cleaned up David. Make sure you take lots of pics before you ship it to NC.

John J
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Her 72 Mach 1 72Mach168Cam 102 2,929 7 hours ago
Last Post: 72Mach168Cam
  New project for this winter. 71 Mach 1 turtle5353 250 26,036 11-19-2019, 10:42 AM
Last Post: turtle5353
  71 Euro Shelby (Mach 1) Clone whelessray 15 1,315 10-18-2019, 09:07 AM
Last Post: Fabrice
  Long day today Maggie Valley Mustang show Carolina_Mountain_Mustangs 1 115 10-05-2019, 07:58 PM
Last Post: 7173Vert
  Cleaning up some loose ends on 73 Carolina_Mountain_Mustangs 6 306 10-03-2019, 06:14 AM
Last Post: NOT A T5
  Summer deadline - 72 Mach 1 Build thread baz70 117 4,851 09-02-2019, 01:10 PM
Last Post: baz70
  72 Grabber Blue Mach 1 build 73429mach 144 24,492 07-02-2019, 05:09 AM
Last Post: 73429mach
  MuscleTang mod project thread (1971 M-Mach 1) tony-muscle 279 32,502 06-28-2019, 11:30 AM
Last Post: tony-muscle



Users browsing this thread: 1 Guest(s)