• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Got the 72 Q cod CJ vert into the work area.
#1
Hey guys and gals,
I got my 1972 Q code CJ Vert over into the work area and was going to put on rotisserie. Was washing off the dust and when in the trunk realized the PO had did a lap joint when he put patch on the Left quarter. He had put full quarter on the R.H. side so no joint.
I WTB NOS Ford Full Left Hand Quarter Panel for 1972 convertible can be 73 and weld the holes up.
He also did what I consider a shoddy job on the floor pans so I am going to cut them back out and do them over. I guess Dynacorn is about only choice there. If anyone has a floor that they are not going to use let me know or I will just order a new one. Do they make full pan or only patch panels?
That sucks I wanted to start paint next month but that will never happen.
The car was dip stripped, resealed, phosphated, epoxy primer and was back to rolling chassis. I will pull the dash back out and look at the cowl also.
Same with the built engine that came with car. I do not trust so found another standard 351 C 4 bolt 1972 block to start over on that also.
I do have lots of Mustang parts so maybe we can do some trading. I have NOS 1965 Mustang door panels in the box. Also all of the chrome trim and NOS Ford trunk mats. Have some NOS 71 - 73 parts and some used parts. Complete set up to convert to manual transmission from 351 block to axle.
Thanks,
David


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#2
David If you are looking for a driver's side OEM quarter I may be able to help. I believe it's a service replacement panel as it has the opening for the 73 filler. I didn't use it as the drivers quarter panel was already replaced at some time in the past. I'll try to get some pics.
  Reply
#3
[Image: 50486_D34_3761_47_A9_BFE9_5_C44_B586_A256.jpg]

[Image: 1_F74_EEDD_B5_D8_40_DA_891_B_A2_B2_A0713_F6_A.jpg]

....hmm, I hope this works...
  Reply
#4
(04-17-2018, 05:16 PM)71 gbvert Wrote: [Image: 50486_D34_3761_47_A9_BFE9_5_C44_B586_A256.jpg]

[Image: 1_F74_EEDD_B5_D8_40_DA_891_B_A2_B2_A0713_F6_A.jpg]

....hmm, I hope this works...

That does look like a LH is it for a vert? Either way PM me what you want for it and can you get pic out of the wrapper?
Thanks,
David


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [WTB] Backup / NSS switch harness - switch doesn't need to work. tony-muscle 3 315 04-27-2018, 11:16 PM
Last Post: tony-muscle
Stang [WTB] Passenger side lower cowl area Paul4425 3 580 08-25-2015, 02:29 PM
Last Post: OMS
  WTB a clean passinger fender in San Diego or LA area sdstang 0 321 01-16-2015, 08:40 AM
Last Post: sdstang
  looking for a set of black highbacks in SoCal area sdstang 1 439 07-21-2013, 10:11 PM
Last Post: Stangrpunk72
  Needing rear window cranks handles for a 73 vert Monterey 7 1,143 08-16-2012, 08:33 AM
Last Post: mweeps
  WTB 71 Grabber Lime or Grn Vert w/ White Deluxe Int. grabber 7 1,117 05-26-2012, 05:57 AM
Last Post: marks73
  [WTB] NOS Radiator for 73 351c 'vert w/ A/C 73vertproject 6 905 05-08-2012, 05:44 PM
Last Post: machman_73
  Vert Drivers Seat Platform M Beauchamp 8 1,721 01-09-2012, 09:11 AM
Last Post: OMS



Users browsing this thread: 1 Guest(s)