• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Getting chrome trim like new products
#1
I was just watching a video on getting a mirror finish to chrome https://www.youtube.com/watch?v=GTJmlXSCD0A

These products were used; Alumicut and Gords polish. Has anyone used these products can give feedback on how they perform

Steve
1971 Grandé
  Reply
#2
(02-24-2019, 05:39 AM)Pegleg Wrote: I was just watching a video on getting a mirror finish to chrome https://www.youtube.com/watch?v=GTJmlXSCD0A

These products were used; Alumicut and Gords polish. Has anyone used these products can give feedback on how they perform

I've never seen that -- I wonder if you can do the whole car like that then just clear coat it..

I totally restored my brights from dull, scratched and some black filth using Dremel polishing wheels with compound -- then finish with Autosol 
...takes the hard work out of it


[Image: polishers.jpg]

[Image: siggy.jpg]

  Reply
#3
I polish all of my stainless and aluminum trim. I zone out with some good 70's rock on the stereo. I have a pedestal buffing to head from Harbor Freight that has held up fine. I have several different buffing discs that I keep in a zip lock bag with the compound I use with it. You cannot use one wheel for multiple grits of polish.
There is a shop in the U.S. you can send to and they charge $37.00 per foot. His process is as follows.
Straighten and hammer out dents.
File the surface to flatten or smooth.
Sand with progressively finer grits of sand paper up to 2,000 grit, use water with paper.
Glass bead the trim to get one uniform surface.
Buff with compound until desired finish is reached.
I do not glass bead mine do not have a huge cabinet to fit into.
You have to understand the physics of the buffing wheel. You cannot present an edge to the wheel or it will grab the part and boom it is bent, gone and you probably will need some attention also, lol. I worked in a hardware supplier and we had rows of buffers. There was always someone out with a broke hand or finger.
Do not wear loose clothes or long sleeves and no gloves except tight fitting rubber gloves. Never buff toward an edge. Here are a few pics of things I am working on right now. I am doing the roof rails today off my Mach 1. You have to strip the anodize and sand and polish aluminum.
The stainless is much easier since it does not oxidize like the aluminum does. The windshield trim on a vert is stainless and mine is shiny.
Any buffing compound works and any polish never really found one that was way better. The last bit of polishing is done with paste and I use hand drill with buffing wheel.

[Image: DSC-0955.jpg]

[Image: DSC-0964.jpg]

[Image: DSC-0967.jpg]

[Image: DSC-0968.jpg]


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Polishing chrome on outside door handles Kilgon 8 408 08-19-2019, 02:43 PM
Last Post: Fabrice
  Door Trim Water shield mustang7173 6 235 08-07-2019, 09:50 AM
Last Post: Carolina_Mountain_Mustangs
  front sealing for rear door trim panel convertible 1971V8 4 264 07-22-2019, 06:08 AM
Last Post: mustang7173
  Chrome slats on sides of Mach 1? Iku64 10 439 06-24-2019, 10:15 AM
Last Post: Iku64
  Fixed rear seat trim Question Danno 5 389 04-30-2019, 09:37 AM
Last Post: Danno
  Is this a good price for seats and qtr trim pamel? scgamecock 4 290 04-04-2019, 10:51 AM
Last Post: scgamecock
  Trim Panels 1972Mach1 4 402 03-22-2019, 01:19 PM
Last Post: 1972Mach1
Wrench Wheel arch trim question Ballaratcastle 6 327 03-17-2019, 08:08 PM
Last Post: Ballaratcastle



Users browsing this thread: 1 Guest(s)