• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fuel vapor separator
#11
These stainless steel scrubbing pads should be good:
https://www.amazon.com/Brheez-Stainless-...wool&psc=1



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#12
I did not think to use steel wool in my vent cap when I replaced my gas tank. I used a piece of foam carburetor air filter from my lawn mower thinking the foam was gas and oil
[Image: 20160427_183049.jpg]

fast image hosting

resistant. Using a stainless scrubbing pad is a better idea.

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle
[Image: DSC_0266xsm.jpg]
[Image: satellite.png] Proud Space Junk Award Winner!












  Reply
#13
(10-09-2017, 09:04 PM)Don C Wrote: These stainless steel scrubbing pads should be good:
https://www.amazon.com/Brheez-Stainless-...wool&psc=1

Thanks a lot Don, will try !
  Reply
#14
Hi, I had the same problem and I discovered that the material is just open cell reticulated urethane foam , but I think stainless steel wool will work too.
  Reply
#15
So im bringing this thread again. I buy a new fuel tank and was about to put back the fuel vapor separator. There is 3 notch in the fuel vapor separator, the tank only have 2 notch, so wtf ???
Should i grind a notch on the fuel vapor separator, i guess so ...
[Image: IMG-1292.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Fuel Line Clip and Screw NOT A T5 4 315 03-06-2019, 05:09 AM
Last Post: NOT A T5
  Fuel line clips to body mach172 9 1,275 03-03-2019, 01:52 PM
Last Post: Stanglover
  Testing the fuel gauge VegasFastback 21 7,030 02-24-2019, 10:33 AM
Last Post: scottyrocks
  Improved fuel sender replacements? Vinnie 2 206 02-19-2019, 03:49 PM
Last Post: mustang7173
  Removing fuel tank and not blowing up Vinnie 15 618 01-28-2019, 08:05 AM
Last Post: Fabrice
  Use of Fuel Stabilizer goodnigh 13 465 01-25-2019, 04:32 PM
Last Post: Stanglover
Wrench Fuel sender alignment Ballaratcastle 8 392 12-09-2018, 07:42 PM
Last Post: Ballaratcastle
  Tank Vapor lines rjpohl 20 650 11-20-2018, 07:18 PM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)