• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
front sway bar end link ques
#1
Did anyone do the front sway bar upgrade to a 1" bar?

I was wondering what the length of the endlink was that was installed with it. My factory ones with the car are 9/16" bolt but they are longer than the end links sent with the new 1" sway bar. The metal spacer is shorter on the new one. Is it shorter due to the urethane bushings?

Can the original end link be used or is the new 1" sway bar bent to a different angle or something. I havent compared the two bars yet ( waiting for penetrating fluid to loosen the nut on existing one ) so I thought I would ask the ques anyway.

Thanks!
  Reply
#2
Whatever the thickness of the replacement it should just bolt in as the original. If you have thicker urethane bushings, end links may be offset to accommodate.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  1971-1973 Mustang 351C 2V Alternator Belt length (or link which to buy) Iku64 2 215 08-12-2019, 11:44 AM
Last Post: Iku64
  front brake pads SteveO_71 6 331 07-16-2019, 07:32 AM
Last Post: SteveO_71
  Lower front seat frame cracks mustang7173 7 483 07-11-2019, 02:27 PM
Last Post: mustang7173
  Removing front door glass without removing up stops Carolina_Mountain_Mustangs 3 382 06-21-2019, 08:44 AM
Last Post: Carolina_Mountain_Mustangs
  rear end link bushings replacement SteveO_71 0 229 06-03-2019, 08:36 AM
Last Post: SteveO_71
  ques related to rotor and race install SteveO_71 5 345 12-20-2018, 03:14 PM
Last Post: SteveO_71
  front disk brake service SteveO_71 17 1,062 12-09-2018, 08:45 AM
Last Post: SteveO_71
  fuse link in ignition SteveO_71 6 496 11-28-2018, 05:08 AM
Last Post: NOT A T5



Users browsing this thread: 1 Guest(s)