• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
front sway bar end link ques
#1
Did anyone do the front sway bar upgrade to a 1" bar?

I was wondering what the length of the endlink was that was installed with it. My factory ones with the car are 9/16" bolt but they are longer than the end links sent with the new 1" sway bar. The metal spacer is shorter on the new one. Is it shorter due to the urethane bushings?

Can the original end link be used or is the new 1" sway bar bent to a different angle or something. I havent compared the two bars yet ( waiting for penetrating fluid to loosen the nut on existing one ) so I thought I would ask the ques anyway.

Thanks!
  Reply
#2
Whatever the thickness of the replacement it should just bolt in as the original. If you have thicker urethane bushings, end links may be offset to accommodate.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  ques related to rotor and race install SteveO_71 5 209 12-20-2018, 03:14 PM
Last Post: SteveO_71
  front disk brake service SteveO_71 17 694 12-09-2018, 08:45 AM
Last Post: SteveO_71
  fuse link in ignition SteveO_71 6 308 11-28-2018, 05:08 AM
Last Post: NOT A T5
  Front brakes upgrade questions 73pony 8 346 11-26-2018, 01:46 PM
Last Post: detritusmaximus
Wrench vibration in rear end finally sloved John J 2 278 10-28-2018, 02:50 PM
Last Post: Carolina_Mountain_Mustangs
Wrench Best place to jack up the front end John J 3 602 05-18-2018, 11:33 AM
Last Post: Carolina_Mountain_Mustangs
  Front Window Rear View Mirror Position andy72 3 579 04-12-2018, 08:41 AM
Last Post: SteveO_71
  Vendor link to gauge cluster circuit board? scgamecock 3 534 01-16-2018, 01:36 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)