I just bought a front spoiler that came with 14 bolts and no instructions.
Anyone have any instuctions or alink that will show the positioning and the where the bolts go?
•
If that does not work for you I have a factory diagram I can scan and put up. I hope this helps. Tom
I am just here to eat my lunch and screw stuff up!!!!!
•
03-19-2011, 07:30 PM
(This post was last modified: 03-19-2011, 07:31 PM by Qcode351mach.)
f117rt;15858 Wrote:[quote=71 ramair 4-speed mach 1;15854]
I did find another great link:
http://members.cox.net/sirius70817/Front...poiler.htm
Really appreciate the help!
WRONG!!! Hope you didn't mount it where he did..Thats an after market valance..I just mounted & test fitted mine today.. if you look at the valance..one side lines up with the edge of the wheel lip & the other side is like an inch in..My after market one does the same thing, I measured both sides & there's a difference of an inch..So If I can't find a good used one, time to extend the short side...I'll take some pics tomorrow & show where the bottom edge of the spoiler should go..but it's not where he shows.
71 ramair 4-speed mach 1;15897 Wrote:Here is a link to the diagram just click on on it and when you get in just click on the pic again it should supersize. Feel free to browse my photobucket for more 71-73 mustang pics and marti reports etc. hope this helps.
http://i1028.photobucket.com/albums/y349...an0001.jpg
Regards Tom
http://s1028.photobucket.com/albums/y349/tomandchelle/
Wrong..diagram is for 69-70..someone penciled in 71-73
LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART
•
f117rt;15847 Wrote:I just bought a front spoiler that came with 14 bolts and no instructions.
Anyone have any instuctions or alink that will show the positioning and the where the bolts go?
Here's how it's done
http://www.7173mustangs.com/thread-how-t...iler-video
LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART
•
Q who's valance do you hae ?
Ours is 15 3/4 tip to end on BOTH sides.
Don
Ohio Mustang Supply
440-949-2556
•
I dont have an spoiler but the only metal sheet non factory original my car has is the front valance, bought on NPD... This repro is HORRIBLE... HOOOOOORRRRIIIIBLLLLE!!!..
As Scott said, it is a lot narrower than it should be and the side that does not fit, is trully far far away... I had to do major metal work to fit the valance decently... I cant imagine adding an spoiler there...
Just a coment but... are there ANY reproduction parts that are trully good?
•