• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Front Coil Spring Perch Tab
#1
Quick question.  I am just now getting around to install my front suspension.  Got all new parts since car didn't have any when I got it.  Question is about the spring perch tab.  Does it go towards the inside near the apron or out towards the wheel?  If anyone has pics of this area, they would be appreciated as well.

Thanks...Andy
  Reply
#2
The perch sits on the upper control arm and bolts to it. The shock goes inside of the spring after installation. I just finished my front suspension a few weeks ago. I used the spring compressor that bolts directly to the perch. Compressed the spring, then installed the new upper control arm, released the spring compression slowly and guided it into the perch mounting holes on the control arm.  The perch has a Tab that will mate with the lower spring end and that is facing the inside toward the shock tower wall. Attached is a pic that I found that may help with orientation. Good luck.

Tom
[Image: th-springcompressor006-1.jpg]
  Reply
#3
Just ripped mine out yesterday. Found the spring that was already in the tower (blue) was far shorter than the one going back in. May explain the hard ride. Ripped the suspension out as one whole unit.

[Image: DSCN3281a.jpg]

[Image: IMG-20190804-153926801.jpg]

[Image: IMG-20190804-161449672.jpg]

al2o3


[url=https://ibb.co/zJRhDQJ][/url]
  Reply
#4
Thanks for the help and pics.  Took my sweet time and got one side in yesterday.  This site and the assembly manuals have been a great help.
  Reply
#5
AOCUSNRET

Highly recommend the roller spring perches!

https://opentrackerracing.com/product/ro...g-perches/


[Image: Capture.png]

the hundred online free

Thanks,
mustang7173 Thankyouyellow

"Courage is being scared to death but saddling up anyway" -- John Wayne
  Reply
#6
runninpony 
+1, but shop around you should find them a little less pricey!

71-73 Mustangs never die, they just go faster!
  Reply
#7
Better options for roller perches
https://dazecars.com/dazed/test.html



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Coil Spring Install Darren 72 8 5,150 05-19-2020, 10:05 AM
Last Post: Carolina_Mountain_Mustangs
  front end vibration naa10104 50 2,567 05-06-2020, 02:19 PM
Last Post: Hemikiller
  New 72 conv Front End cv_72mustang 7 707 05-05-2020, 02:03 PM
Last Post: delawarebill
  Help, Anyone recognize these front brake calipers! 92GTS-R 14 427 04-20-2020, 10:54 AM
Last Post: Don C
  Questions on Front end rebuild. jowens1126 17 1,042 03-24-2020, 04:28 PM
Last Post: 73pony



Users browsing this thread: 1 Guest(s)