• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fox Body Part Needed or part number needed
#1
Looking for the part number of this or if someone has a new one sitting around and wants to sell. It is the fox body shift lever bushings.


Attached Files Thumbnail(s)
   

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#2
Anyone know anything on this. I cannot fins Jack S**T online.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#3
73pony, those insulators appear to be the ones  from a 90-04 Mustang or 85-88 Turbo T-Bird T5 shifter. Don't have all my 80/ info with me so some numbers a little difficult to track down. The insulator on the right side is E5SZ-7246-A. Discontinued from Ford, but may be available at parts venders that handle the 79/ Fox parts. The piece on the left may of been part of the shift lever, since it does not show in any illustrations. When checking the shift lever it indicates that the insulator was included, with only the right side insulator in your illustration showing a part number. If you can't find one on line or from a Mustang parts vender, contact your local Ford dealer. If they are on OE Connection, which is a dealer parts locator (most are) they can run the E5SZ-7246-A number. If they are on the system then they will be familiar with Vintage Parts which shows 25 of the E5SZ insulators. My illustration is typical so while it may not be the same as yours, it does show the metal u shaped piece on the shift lever.


Attached Files Thumbnail(s)
   

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#4
You might have to get the whole stock shifter to get them.
http://www.ebay.com/itm/83-04-Mustang-LX...2432185841
  Reply
#5
Thanks for the info guys. this helps a lot.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#6
was there not anything at Late Model Restoration
  Reply
#7
Nothing. Ended up getting a urethane kit to rebuild your own engine mounts and made up a form based on the old rubber and made them up. Work great abs better feel than the rubber.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  New Wide Body Shelby 73pony 8 1,473 05-24-2017, 08:55 AM
Last Post: jpaz
Wrench Brake problem on the 93 fox body Don65Stang 6 1,918 10-25-2011, 04:28 PM
Last Post: MotoArts
  {Mustang Monthly}Fox Body Mustangs - Fox Revival Forum Bot 3 3,971 04-14-2011, 01:13 AM
Last Post: Don65Stang
  {Mustang Monthly}1965 Ford Mustang GT - How-To Plan For Ponies: Part Two In A Five-Part Series Forum Bot 0 663 03-23-2011, 05:04 PM
Last Post: Forum Bot
  [Mustang Daily}Kurgan Motorsports drops a Coyote 5.0L V8 into a Fox Body Mustang Forum Bot 0 1,046 03-22-2011, 09:35 AM
Last Post: Forum Bot
  converting body styles 1967 was chopped not2old 0 797 09-16-2010, 04:06 PM
Last Post: not2old



Users browsing this thread: 1 Guest(s)