• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ford Engine Data Web Site
#1
Attached is a link to very good site that has consolidated information on Ford engines specificaitons.

http://www.raceabilene.com/kelly/hotrod/engine.html

Who knows it might be the "source" for a future "Weekly Fun QuestionSmile!

BT
  Reply
#2
Great link! I'm going to look into adding a link gallery for you guys! Cool

[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
"Just relax, I've got a friend named Felix who can fix anything!" ~James Bond
  Reply
#3
Great link, BT, especially for us DIY engine rebuilders-to-be. Smile

Now, if I could just find the compression ratio for the 351C-2V. Most sources say 8.3 - 8.7 to one, give or take, but I haven't been able to find a definitive source. Sad

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#4
According to the "Shop Manual", the compression ratio for the '73 2V is 8.0:1.

Like you, I have seen other sources over the year that had conflicting values.

Hope this helps!

BT
  Reply
#5
(10-12-2010, 08:55 PM)cobra3073 Wrote: According to the "Shop Manual", the compression ratio for the '73 2V is 8.0:1.

Like you, I have seen other sources over the year that had conflicting values.

Hope this helps!

BT

Well, the shop manual is about as definitive as I can find, so I'll take it. Smile

Thanks for the info, BT!

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351C M-Code engine Timing issue! Meyer 25 456 06-17-2018, 08:41 AM
Last Post: Stanglover
  Engine buffs: why do our engines need to warm up? Vinnie 20 505 06-03-2018, 03:58 PM
Last Post: Don C
  Any good engine builders in my area? 73' mach 1 7 317 05-21-2018, 11:51 AM
Last Post: 73' mach 1
  Performance Part 302 engine Cresee 7 332 05-12-2018, 06:12 PM
Last Post: Ed Raver
  Engine mount orientation CalgaryChris 34 1,127 04-06-2018, 05:05 AM
Last Post: EBSTANG
  Engine Build Complete EdM 5 392 04-03-2018, 08:53 PM
Last Post: EdM
  Mallory distributor cap sane as one ford? scgamecock 4 214 03-25-2018, 09:06 AM
Last Post: scgamecock
  Which Engine Block Plate is Correct for a 351C? I have three different plates. 4mm 6 687 02-26-2018, 09:03 AM
Last Post: Hemikiller



Users browsing this thread: 1 Guest(s)