• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[For Sale] Top Loader 4 spd with hurst out of 72 HO
#1
Out of a 1972 "R" Code. I'm changing it out for an aftermarket 6 speed. Tranny, drive shaft and Hurst shifter included. In perfect shape.

Make offers to my email.
philtut@hotmail.com

Thanks,

KigerStang EV
To help spread the word, remember to like the page before you leave!
  Reply
#2
A munci in a 72 R Code Mustang? Shouldn't that be a Toploader?

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
#3
Need pics and ID info from the metal tag on the case...

Pete - MotoArts Decals and Signs
'71 Sportsroof 351C-4V/4-speed - FINALLY under construction - no, wait, on hold again...
'90 Mustang 7-Up 5.0 ragtop, rolling beater
'66 Sunbeam Tiger Mk.IA, survivor
  Reply
#4
Yes - The Muncie would be correct for GM cars- late 60's thru mid 70's (I think). Had a '69 SS 396 Chevelle (1st car - drove it before I had my license) back around 73 or 74 with that transmission.

Wide Ratio top loader correct for the 72 351 HO cars.

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#5
Boss1Ray;78403 Wrote:Yes - The Muncie would be correct for GM cars- late 60's thru mid 70's (I think). Had a '69 SS 396 Chevelle (1st car - drove it before I had my license) back around 73 or 74 with that transmission.

Wide Ratio top loader correct for the 72 351 HO cars.

Ray
You are probably right. Ill get the tag off the unit and post. Im hoping to offset the cost of the 6 speed and power train. It is the original tranny.

philt;78412 Wrote:
Boss1Ray;78403 Wrote:Yes - The Muncie would be correct for GM cars- late 60's thru mid 70's (I think). Had a '69 SS 396 Chevelle (1st car - drove it before I had my license) back around 73 or 74 with that transmission.

Wide Ratio top loader correct for the 72 351 HO cars.

Ray
You are probably right. Ill get the tag off the unit and post. Im hoping to offset the cost of the 6 speed and power train. It is the original tranny.

[Image: 2zjazkg.jpg]
[Image: 2q1xj5w.jpg]
[Image: 2ijs1w1.jpg]

Better pic of the tag:
[Image: juwg7a.jpg]

I have the Marti on this car too. Ill post that later in that area of the forum.

This is whats going in its place
http://www.summitracing.com/parts/CMG-TU...refilter=0

KigerStang EV
To help spread the word, remember to like the page before you leave!
  Reply
#6
Per the David Kee Topladers site, you have a:

RUG-BJ --- 1971 Mustang --- 351 CJ, Boss 351 --- wide (ratio) --- Before 12/1/71---
28-spline

Must be an early production car.
Asking $$$?

Pete - MotoArts Decals and Signs
'71 Sportsroof 351C-4V/4-speed - FINALLY under construction - no, wait, on hold again...
'90 Mustang 7-Up 5.0 ragtop, rolling beater
'66 Sunbeam Tiger Mk.IA, survivor
  Reply
#7
MotoArts;78440 Wrote:Per the David Kee Topladers site, you have a:

RUG-BJ --- 1971 Mustang --- 351 CJ, Boss 351 --- wide (ratio) --- Before 12/1/71---
28-spline

Must be an early production car.
Asking $$$?

Really not sure what its worth. I may be selling the entire drive trane out of the 72 R code to pay for the after market drivetrane

KigerStang EV
To help spread the word, remember to like the page before you leave!
  Reply
#8
Must resist the 'buy it now' button... oh wait, whoo, there is no buy it now button.

Seriously, I often dream of going to a manual. Maybe one day.

What six speed are you going for?

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#9
will e;78627 Wrote:Must resist the 'buy it now' button... oh wait, whoo, there is no buy it now button.

Seriously, I often dream of going to a manual. Maybe one day.

What six speed are you going for?

http://americanpowertrain.com/
6 speed with Hydraulic clutch

KigerStang EV
To help spread the word, remember to like the page before you leave!
  Reply
#10
Wonder how much is involved to swap this in place of my 3 spd? I wanted go 5spd but if I can find a 4spd for right price...ohh damn the wheels are spinning to fast in my head again.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Towne Top Removable Hard Top 1964 1/2 to 68 Mustang Convertible Carolina_Mountain_Mustangs 0 1,567 02-06-2016, 12:27 PM
Last Post: Carolina_Mountain_Mustangs
  Table Top Media Blast Cabinet basstrix 1 630 01-25-2016, 03:18 PM
Last Post: basstrix



Users browsing this thread: 1 Guest(s)