• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[For Sale] Ford Racing 302 (306) Crate Engine and Accessories
#1
Up for sale is a new, never installed Ford Racing 306ci crate engine.  I bought this engine several years ago for the coupe project but the coupe is gone so I don't need this engine any more!  It has been sitting on a stand for a while and does have some corrosion on the valve covers and discoloration on the intake but I think it will polish up perfectly!  I had an incident with a stray cat in the garage and it must have pissed on top of the intake.  The engine was covered but the animal scratched through the plastic on the top and some urine got on to the intake and down onto the block under the intake.  The intake gaskets were not on at that time.   I cleaned it real good and oiled the affected areas so it should be good to go!  I just put the intake and exhaust on finger tight for the photos.  Gaskets are just sitting in place with no RTV or anything.  It wasn't a huge issue but I wanted full disclosure for this sale! 

Due to the cat incident and extra polishing it will need, I am offering this engine and accessories at a big discount! 

Here are some of the specs:

Aluminum 'X' Heads
E303 Hydraulic Roller Cam and Roller Rockers
340HP @ 5500RPM
Older Style Ribbed Ford Racing Aluminum Valve Covers


I am also including a bunch of extra items with the engine:
Hooker Stainless Headers and gaskets
Edelbrock Performer Intake and gaskets
Edelbrock High Performance Fuel Pump
Water Pump
Pertronix Distributor
Pertronix Flame Thrower Coil and Bracket
Ford Racing Black Plug Wires
ARP Stainless Intake, Exhaust and Carb Hardware
Dipstick
Ford Racing Billet Wire Loom Set
Hooker Power Steering Bracket

Hooker Competition Headers will fit:

[*]Ford 255-302W
[*]1964-73 Mustang, Cougar
[*]1966-69 Comet
[*]1970-77 Maverick
[*]1966-73 Falcon, Fairlane, Torino, Ranchero, Cyclone
[*]1.625" x 28" Primary Tubes
[*]3" x 8" Collector
[*]Stainless Steel


The engine comes with a rear sump oil pan which will need to be changed for 71-73 applications.  You will also need a carb, air cleaner and other components such as starter, alt, pulleys, fan, etc...

I am asking $3000 or best offer for everything pictured...Local pick up in Latrobe, PA 15650

I paid $4000 for the engine alone and over $1000 for the accessories included.  This is a great deal for someone that needs a 6 cylinder upgrade or a 302 replacement.  


[Image: 20180128_131455.jpg]

[Image: 20180128_131513.jpg]

[Image: 20180128_131530.jpg]

[Image: 20180128_131553.jpg]

[Image: 20180128_131627.jpg]

[Image: 20180128_131641.jpg]

[Image: 20180128_131703.jpg]

[Image: 20180128_131740.jpg]

[Image: 20180128_131856.jpg]

[Image: 20180128_131913.jpg]

[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
"Just relax, I've got a friend named Felix who can fix anything!" ~James Bond
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [FOR SALE] C6 Automatic Transmission, shifter, flex plate, drive shaft and all accessories tony-muscle 0 57 10-12-2018, 05:27 PM
Last Post: tony-muscle
  71 72 73 Ford Mustang Console Assembly, Manual or Auto, Black w/o Clock, No Tray 1973_Mustang_Conv 1 164 09-18-2018, 10:06 AM
Last Post: Carolina_Mountain_Mustangs
  D0OE 9425 D intake Ford 429 CJ 9J24 date 428kid 1 589 08-14-2018, 12:04 PM
Last Post: 428kid
  1971 D1AE GA Ford 351 Cleveland 4v heads 428kid 4 821 06-17-2018, 04:06 PM
Last Post: 428kid
  Original Ford D3ZE Non-A/C Radiator rackerm 4 457 06-12-2018, 05:42 PM
Last Post: JD79
  [FOR SALE] Police Interceptor exhaust manifolds {429-460 engine} Wilco549 2 1,064 05-28-2018, 12:09 PM
Last Post: Carolina_Mountain_Mustangs
  [FOR SALE] 4 Dog Dish Ford Motor Co Hub Caps rocketfoot 1 328 05-05-2018, 06:33 AM
Last Post: rocketfoot
  [FOR SALE] Matching #'s 73 Mustang 351CJ engine, 4 speed trans 74mach 2 1,132 01-27-2018, 10:37 AM
Last Post: 73mockone



Users browsing this thread: 1 Guest(s)