• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Floor Support Replacement Advice
Hey Guys,

I'm planning on replacing the driverside floor support on my 73'. Has anyone done this before, or know of a good build forum involving this?

I need to cut open the bottom of the torque box in order to get out those spot welds holding it onto the frame, but if I do cut the torque box open am I good to just weld it back up or has it lost it's purpose once you start cutting into it?

Anyone have any experience with this, thanks.
[Image: IMG-E0944.jpg]

[Image: IMG-E0945.jpg]

[Image: IMG-E0946.jpg]

total loss calculator
Before you cut too much out make sure the body is supported and kept in correct position. If you flex the body and weld in a new frame rail nothing will align properly. If your floor was rusty good bet the cowl is leaking letting the water get to the floor so check that also.

When a man is in the woods and talks and no women are there is he still wrong??
By the looks of the pics, its not in that bad of shape. Doesn't look like there are any holes and the metal is still pretty thick. I would clean that area up. Hammer back the bent areas and throw a few welds on those seams. Use some por15 or eastwood frame paint in there and move onto the floor pans.


1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]

Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
  71 Mach 1 Mustang Advice Newtostangs 33 943 08-30-2019, 08:13 AM
Last Post: Hemikiller
  Gas Tank and misc fuel parts replacement 302 danumkc 5 284 05-20-2019, 02:53 PM
Last Post: cv_72mustang
  Manipulated VIN? Official replacement colonel 11 670 02-16-2019, 10:06 AM
Last Post: mjlan
  Advice on brake conversion kits slowpoke17 11 798 02-16-2019, 06:42 AM
Last Post: Flatback72
Cone Need advice on moving the car coop's mustang projects 10 949 01-09-2019, 06:46 PM
Last Post: clevelandcoupe
  351C 2V Build advice ianpala 34 2,932 05-20-2018, 04:12 PM
Last Post: ianpala
  Need advice 1972 Q-code/4 speed project Pheadrus 6 1,201 03-30-2018, 07:11 PM
Last Post: Harry365
  1972 Mach 1 Grille Support Capn_Morgan 25 3,189 03-28-2018, 11:02 PM
Last Post: NG8264723

Users browsing this thread: 1 Guest(s)