• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Floor patch
#1
Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.
Thanks, Rob

movie stars with addictions go to the Betty Ford clinic,
I take my addiction to the Henry Ford clinic.Haha
  Reply
#2
317/371/2668 text me a pic of what you need, getting ready to cut up the floor of a 73 Q code. Dave
  Reply
#3
If N2odart isn't able to cut one out for some reason, just let me know. I have one already cut out that I was going to use for myself.

6972boss;285942 Wrote:Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.
Thanks, Rob

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#4
Motorcity Mustang;286133 Wrote:If N2odart isn't able to cut one out for some reason, just let me know. I have one already cut out that I was going to use for myself.

6972boss;285942 Wrote:Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter. I need to patch this section.
Thanks, Rob

I will let you know. He has been very helpful so far.
Thank you!

movie stars with addictions go to the Betty Ford clinic,
I take my addiction to the Henry Ford clinic.Haha
  Reply
#5
I'll have your patch out tomorrow evening, I cut the patch pretty big and I'm thinking the transmission has to come out before I go through the frame part that the trans mount bolts to.
  Reply
#6
N2odart;286254 Wrote:I'll have your patch out tomorrow evening, I cut the patch pretty big and rI'm thinking the transmission has to come out before I go through the frame part that the trans mount bolts to.

Thank Dave! No rush, no worriesthumb

movie stars with addictions go to the Betty Ford clinic,
I take my addiction to the Henry Ford clinic.Haha
  Reply
#7
(12-28-2016, 02:39 PM)Motorcity Mustang Wrote: If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

6972boss;285942 Wrote:Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter.  I need to patch this section.
Thanks, Rob

Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat  Big Grin 
Any help is greatly appreciated!
Thanks,
Rob

movie stars with addictions go to the Betty Ford clinic,
I take my addiction to the Henry Ford clinic.Haha
  Reply
#8
If the floorpan is the same reguardless of transmission I can cut the patch out of my 73' coupe parts car.

Let me know by PM. It had an FMX
  Reply
#9
(03-26-2017, 02:05 PM)6972boss Wrote:
(12-28-2016, 02:39 PM)Motorcity Mustang Wrote: If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

6972boss;285942 Wrote:Anyone have a section of floor around the transmission shifter opening and surrounding tunnel? Hot rodders cut the tunnel for a go fast shifter.  I need to patch this section.
Thanks, Rob

Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat  Big Grin 
Any help is greatly appreciated!
Thanks,
Rob
Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#10
(03-26-2017, 06:05 PM)Motorcity Mustang Wrote:
(03-26-2017, 02:05 PM)6972boss Wrote:
(12-28-2016, 02:39 PM)Motorcity Mustang Wrote: If N2odart isn't able to cut one out for some reason, just let me know.  I have one already cut out that I was going to use for myself.  

Hi, well after a long wait, he did not come through. Do you still have the floor patch for the trans tunnel available? I also am in need of a section of floor for the right front floorboard, from the frame rail to the rocker. Also need a 15/16 front sway bar, ginger belts for the front and shoulder 72/73, drivers side upper door hinge plates with bolts and a drivers seat  Big Grin 
Any help is greatly appreciated!
Thanks,
Rob
Let me run down to the garage after work tomorrow and get you a picture of the ones I have cut out.  I won't have a floor pan (all my 31 parts cars are pretty rusty), but should have the upper door hinge plates, drivers seat (do you need ginger?), and will check for a 15/16 sway bar and ginger belts.

Here are pictures of the tunnel, drivers seat and the upper drivers hinge plate.  I don't have a 15/15 sway bar (just the normal 3/4)), nor the ginger seatbelts, just black.


Attached Files
.jpg   IMG_2973.JPG (Size: 140.72 KB / Downloads: 34)
.jpg   IMG_2974.JPG (Size: 128.05 KB / Downloads: 33)
.jpg   IMG_2975.JPG (Size: 90.1 KB / Downloads: 34)
.jpg   IMG_2979.JPG (Size: 110.04 KB / Downloads: 33)
.jpg   IMG_2987.JPG (Size: 134.81 KB / Downloads: 33)
.jpg   IMG_2988.JPG (Size: 128.17 KB / Downloads: 33)

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  WTB Trunk Floor Patch & Gas Tank 73 rjpohl 14 523 01-20-2019, 11:38 PM
Last Post: secluff
  Original Ford 73 Ginger (carpet) floor mats rackerm 2 734 05-18-2017, 08:08 PM
Last Post: rackerm
  [WTB] Front left fender patch cobra94svt 4 696 05-12-2017, 04:26 PM
Last Post: cobra94svt
  [WTB] OEM gas filler floor plate, nos rear tail light bezels, nos ext door handles 4mm 3 756 04-12-2016, 08:44 PM
Last Post: 4mm
  [WTB] Floor Shift Bezel piper62j 4 756 04-10-2016, 07:35 AM
Last Post: 73pony
  [WTB] sections of sheetmetal floor under rear seats tony-muscle 3 881 10-08-2015, 04:49 PM
Last Post: tony-muscle
  Space saver trunk floor bracket eddyw 1 627 12-25-2014, 03:36 PM
Last Post: Motorcity Mustang
  [WTB] Front fender patch sm3570 4 835 07-06-2013, 07:01 AM
Last Post: 87fox72mach



Users browsing this thread: 1 Guest(s)