• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
FiTech EFI Install
#1
All,

I have the FiTech EFI 400 on the way to replace my Holley Carb. Ye ha! I will be installing the Tanks, Inc PA-4 Tank fuel pump. If you remember, Autoedit installed the PA-4 in Big Marge.

My plans are to install FiTech EFI and PA-4. I have read many threads about the return fuel line and the vapor line.

I am going to purchase a new tank to fuel pump line and run it parallel to the factory installed fuel line. Next, while the updated tank is out, I will cut two small holes, using hole saws, in the cross member to plum the gas and vapor lines through to connect.

The goal here is to make it look stock as possible.

[Image: 2cgldnt.jpg]
[Image: 2qdyhpt.jpg]

https://www.youtube.com/watch?v=X3jyyOGlD9o

Keep you post on my progress.

mustang7173
  Reply
#2
Awesome; looking forward to seeing how it all goes for you; i've been window shopping the Fitech and holley sniper systems and they look pretty awesome.

I have high hopes for your install; seems like these systems are going to be really great bang for the buck!
  Reply
#3
iceberg65,

I have a Colleague who has, be careful here, 1968 Camaro, 396 and a 1967 Camaro, 327 with the FiTech 400 and 600 along with the Command Center. It is amazing the difference it makes. I spoke to him on Friday, and he stated that the 396 had not been started in week. He went out, turn the key, and it fired on the first crank and just purred.

The FiTech, IMO, is the way to go. Especially if you are on a budget!

mustang7173
  Reply
#4
I've honestly found a lot of praise for the FiTech systems! If the exchange rate to usd wasnt so harsh right now I'd probably have one on the shelf, as of now I'm putting money into a few other things on the car an keeping an eye on them.
  Reply
#5
Keep us informed how it works out. I have one on my F-100. LMK if you have any questions.

[Image: IMG_3322_zpsvubzfsas.jpg]

[Image: IMG_3327_zpsej6csay7.jpg]

Mike
__________________________________
Black 1985 GT
Yellow 1973 Mustang Mach 1
Black 2012 5.0 GT, 6-speed, Brembo brakes, 3.73's
Wimbledon White 1966 F-100 Shortbed Styleside, 390ci, Tremec 3550, FiTech EFI
  Reply
#6
MeZapU,

Man, that looks great. Where did you mount the command center? Thanks for the heads up on your install. I know it runs really well?

mustang7173
  Reply
#7
iceberg65,

I hope you can find a way to get one in the future!

Thanks,

mustang7173

iceberg65;287292 Wrote:I've honestly found a lot of praise for the FiTech systems! If the exchange rate to usd wasnt so harsh right now I'd probably have one on the shelf, as of now I'm putting money into a few other things on the car an keeping an eye on them.
  Reply
#8
Looking forward to following your install. I bought the Fitech 600hp unit from a member here and plan on a spring time install

Larry
  Reply
#9
All,

FYI! I was reading in the FiTech instructions, fuel delivery systems, and at the end of the section, it states that if one uses another fuel delivery system, please contact FiTech support to see if the fuel delivery system is compatible with their EFI system. Failure to do so could void your warranty. Well, Ok then. So, I have sent support an email to make sure the Tanks, Inc PA-4 is compatible. I will let ya'll know their response.

mustang7173
  Reply
#10
mustang7173;287303 Wrote:All,

FYI! I was reading in the FiTech instructions, fuel delivery systems, and at the end of the section, it states that if one uses another fuel delivery system, please contact FiTech support to see if the fuel delivery system is compatible with their EFI system. Failure to do so could void your warranty. Well, Ok then. So, I have sent support an email to make sure the Tanks, Inc PA-4 is compatible. I will let ya'll know their response.

mustang7173

Looking forward to hearing what they say. I'm looking at the same setup for my car. Keep us posted.

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  EFI fuel tank 73' mach 1 18 325 Yesterday, 08:56 AM
Last Post: rcadd1ct
  Holley sniper efi system andresde71 6 464 06-04-2019, 03:21 PM
Last Post: mikeyhunts
  Holley Sniper EFI HyperSpark Distributor Kit 73' mach 1 5 334 04-29-2019, 05:15 PM
Last Post: mikeyhunts
  351C EFI don blanchard 13 814 04-28-2019, 11:01 PM
Last Post: detritusmaximus
  Header install jpaz 18 715 04-26-2019, 12:22 PM
Last Post: jpaz
  efi pump mount location EvilPuppetMaster 7 537 01-02-2019, 10:29 PM
Last Post: EvilPuppetMaster
  Coyote install in a 1973 Fastback. protouringstang73 12 1,055 10-04-2018, 10:55 AM
Last Post: bkdunha
  Efi conversion Cainsable 6 867 09-15-2018, 10:56 AM
Last Post: fangstang



Users browsing this thread: 1 Guest(s)