• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
fender aprons and cowl
#1
where do I get this sheet metal that welds to the Cowl and rear fender apron and where do you get the bracket that the good hinge bolts to on the out side of the apron? also does any one remake the splash Shields I need the drivers side front that starches to the radiator support? also a dumb question does. Do the windshield and cowl need to come off when replacing the fender aprons?


Attached Files Thumbnail(s)
       

This is more than a hobby, its a Passion, its a way of life.
  Reply
#2
Have you checked with Don at OMS?
  Reply
#3
Wrench 
All,

Just FYI here on the inner fender to cowl apron sheet metal. I was kindly surprised by the fact that the inner apron bracket was already attached to the upper cowl panel before line assembly. But, considering, it needed to be spot welded before line assembly. It would be nice to have that part since most have rust issues. I looked through the Ford Master Parts Catalog to see if I could fine that part. No success. Here is the FMC Master parts catalog with the upper cowl -


[Image: 259ijww.jpg]


Copy Right: Ford Motor Company May, 1975

mustang7173 Big Grin
  Reply
#4
I should have the splash shield you need. Send me a pic so I know what you need for sure.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  My method for cowl repair tony-muscle 25 1,834 12-16-2018, 01:14 AM
Last Post: tony-muscle
  plastic fender to cowl filler panel trim information mach1000 6 716 03-13-2018, 08:37 AM
Last Post: mach1000
  Firewall Cowl Molding rocketfoot 9 783 02-15-2018, 06:07 PM
Last Post: rocketfoot
runninpony rear fender apron NOT A T5 3 618 09-28-2017, 07:48 AM
Last Post: Carolina_Mountain_Mustangs
runninpony plastic fender cover plates NOT A T5 9 1,376 08-27-2017, 06:07 AM
Last Post: NOT A T5
  Fender extension??? Danno 7 812 08-16-2017, 05:02 PM
Last Post: Danno
  73 Front Fender Valance Support Bracket clevelandcoupe 3 866 06-25-2017, 04:48 PM
Last Post: OLE PONY
  Front fender splash shield installation Paul113 2 865 06-14-2017, 08:33 AM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)