• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Exhaust sound clips
#1
I remember others asking about starting a thread about this but haven't found anything in a search. I'm trying to decide on my final exhaust. My setup is a 408C EFI with FPA headers. The rest is TBD but I'm leaning toward a 2.5" exhaust with X pipe going into either Pypes street pros or Spintech street pros. I had Spintechs on my 383 in a 95 Caprice which sounded pretty good but I know different engines mean different sounds. Just wanted to see what others are using and if anyone has sound clips to post. Thanks
  Reply
#2
Here's mine.  351C-2V with Edelbrock Performer intake & 600 carb, mild port & polish on 2V heads, Ceramic coated Hooker headers, Pypes 2.5" stainless with X-pipe running though Pypes Street Pro mufflers.

Hope it helps.

http://www.mister4x4.net/cars/Mach_1/Fra...28.mp4?_=1

Eric

[Image: mach1sig2.gif]
[+] 2 users Like Mister 4x4's post
  Reply
#3
Here is a stock 351C 2v with 2 1/2" stainless with x pipe and flowmaster FX mufflers.
https://www.youtube.com/embed/xFQQN--nU4w

Here is my 408 with pretty much same system but i also have cutouts. Beginning of clip cutouts are closed then once lined up on road, i open them.
https://www.youtube.com/watch?v=HrKW2Sjyvwc

Heres cutouts open....... whatever system you decide to get, buy electric cutouts. I love mine.
https://www.youtube.com/watch?v=SoW1fhaF...e=youtu.be
https://www.youtube.com/watch?v=P9vS_NnA9TA

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

https://youtu.be/SoW1fhaFPzY  Burn Out Video. 

[Image: 044.jpg]
[+] 3 users Like turtle5353's post
  Reply
#4
Both sound very good. Eric, I'd love to hear yours from a take off or a casual rolling through the gears. I'd really like to keep this thread going this time and capture as much data as possible to all as an example.
It's really good that you guys included what your setup is for a more accurate description as to what to expect!
  Reply
#5
(02-12-2020, 12:59 PM)73\ mach 1 Wrote: Both sound very good. Eric, I'd love to hear yours from a take off or a casual rolling through the gears. I'd really like to keep this thread going this time and capture as much data as possible to all as an example.
It's really good that you guys included what your setup is for a more accurate description as to what to expect!

I don't know when I'll be able to make that happen.  I'm that guy that usually falls victim to taking pictures and whatnot of all my buddies, but usually gets left out when it's time to capture mine.  I'll definitely see what I can do, though.  Cool

Eric

[Image: mach1sig2.gif]
  Reply
#6
Mister 4x4 Wrote:
73' mach 1 Wrote:Both sound very good. Eric, I'd love to hear yours from a take off or a casual rolling through the gears. I'd really like to keep this thread going this time and capture as much data as possible to all as an example.
It's really good that you guys included what your setup is for a more accurate description as to what to expect!

I don't know when I'll be able to make that happen.  I'm that guy that usually falls victim to taking pictures and whatnot of all my buddies, but usually gets left out when it's time to capture mine.  I'll definitely see what I can do, though.  Cool
Sounds good man.
  Reply
#7
Those video clips Kevin put up are bad-ass!  Nice job!   Bravo

Eric

[Image: mach1sig2.gif]
[+] 2 users Like Mister 4x4's post
  Reply
#8
(02-12-2020, 12:03 PM)Mister 4x4 Wrote: Here's mine.  351C-2V with Edelbrock Performer intake & 600 carb, mild port & polish on 2V heads, Ceramic coated Hooker headers, Pypes 2.5" stainless with X-pipe running though Pypes Street Pro mufflers.

Hope it helps.

http://www.mister4x4.net/cars/Mach_1/Fra...28.mp4?_=1

AHHH MAN :-)  awesome sound. Hope mine sounds like that. Is the cam stock or?
[+] 1 user Likes machattack's post
  Reply
#9
(02-13-2020, 12:53 AM)machattack Wrote:
(02-12-2020, 12:03 PM)Mister 4x4 Wrote: Here's mine.  351C-2V with Edelbrock Performer intake & 600 carb, mild port & polish on 2V heads, Ceramic coated Hooker headers, Pypes 2.5" stainless with X-pipe running though Pypes Street Pro mufflers.

Hope it helps.

http://www.mister4x4.net/cars/Mach_1/Fra...28.mp4?_=1

AHHH MAN :-)  awesome sound. Hope mine sounds like that. Is the cam stock or?

Thanks! 

The cam is not stock - it's a mid-range CompCams unit, I stopped short of getting into the lumpy idle/race cam section. 

In fact, here are pretty much all the engine specs:

 -- .060" bores w/9.5:1 Keith Black hypereutectic flat-top pistons
 -- CompCams Roller cam 274/274 w.566" lift (.218/.218 @.050" on 110 lobes)
 -- CompCams Hi-Energy Roller "Everything" (1.73 Rockers, lifters, rods, rod guides)
 -- Crane Cams screw-in 7/16" rocker studs
 -- Edelbrock Performer intake
 -- Edelbrock Performer 600CFM carb
 -- magnafluxed, balanced & blueprinted by machine shop
 -- 3-angle valve job & hardened seats (rebuilt the stock 2V heads w/mild port & polish)
 -- Chrome 'stock' oil pan
 -- Edelbrock valve covers
 -- Holley "Black" electric fuel pump
 -- Duraspark ignition w/Accel Super Coil & 8mm wires
 -- Hooker Competition Ceramic-coated Long-Tube Headers
 -- Pypes 2.5" stainless exhaust w/X-pipe
 -- Pypes Street Pro mufflers with 2.5" polished slash tips

Hope that helps!

Eric

[Image: mach1sig2.gif]
[+] 1 user Likes Mister 4x4's post
  Reply
#10
(02-13-2020, 09:47 AM)Mister 4x4 Wrote:
(02-13-2020, 12:53 AM)machattack Wrote:
(02-12-2020, 12:03 PM)Mister 4x4 Wrote: Here's mine.  351C-2V with Edelbrock Performer intake & 600 carb, mild port & polish on 2V heads, Ceramic coated Hooker headers, Pypes 2.5" stainless with X-pipe running though Pypes Street Pro mufflers.

Hope it helps.

http://www.mister4x4.net/cars/Mach_1/Fra...28.mp4?_=1

AHHH MAN :-)  awesome sound. Hope mine sounds like that. Is the cam stock or?

Thanks! 

The cam is not stock - it's a mid-range CompCams unit, I stopped short of getting into the lumpy idle/race cam section. 

In fact, here are pretty much all the engine specs:

 -- .060" bores w/9.5:1 Keith Black hypereutectic flat-top pistons
 -- CompCams Roller cam 274/274 w.566" lift (.218/.218 @.050" on 110 lobes)
 -- CompCams Hi-Energy Roller "Everything" (1.73 Rockers, lifters, rods, rod guides)
 -- Crane Cams screw-in 7/16" rocker studs
 -- Edelbrock Performer intake
 -- Edelbrock Performer 600CFM carb
 -- magnafluxed, balanced & blueprinted by machine shop
 -- 3-angle valve job & hardened seats (rebuilt the stock 2V heads w/mild port & polish)
 -- Chrome 'stock' oil pan
 -- Edelbrock valve covers
 -- Holley "Black" electric fuel pump
 -- Duraspark ignition w/Accel Super Coil & 8mm wires
 -- Hooker Competition Ceramic-coated Long-Tube Headers
 -- Pypes 2.5" stainless exhaust w/X-pipe
 -- Pypes Street Pro mufflers with 2.5" polished slash tips

Hope that helps!
Thank you,
I appreciate you taking the time to send that info!
Rod
[+] 1 user Likes machattack's post
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Exhaust Statcoy 2 108 02-16-2020, 04:25 PM
Last Post: jpaz
  Exhaust pipe adapter n_reckless 2 241 11-07-2019, 08:53 PM
Last Post: n_reckless
  Wanting to buy new exhaust system for my 351 C 4bbl, 73 mach 1, suggestions? Zatherith 17 970 10-27-2019, 03:16 PM
Last Post: Don C
  351C 4V Exhaust system kcmash 14 3,479 08-09-2019, 04:57 PM
Last Post: goodnigh
  Exhaust for 73 Mustang 302 604calvin 6 579 07-02-2019, 07:47 AM
Last Post: MeanMachine



Users browsing this thread: 1 Guest(s)