• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Engine firing video
#1
Also includes seeing RCC INNOVATIONS tach at work!

Sorry about the poor sound quality. this was taken with my phone.

Thanks for all of the responces from my last post.

Here it is, finally running with no issues

https://www.youtube.com/watch?v=t2LDkCWB...ata_player

"Do it once, do it right!"
  Reply
#2
SWEET, SWEET sounding Mach! Smile

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#3
congrats! sounds great

[Image: keytft.png]
  Reply
#4
Thanxx

"Do it once, do it right!"
  Reply
#5
Sweet, sweet success!
  Reply
#6
Congrats, sounds awesome.. You must be excited!
  Reply
#7
Nice job Mike!

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#8
Sounds awesome, very nice job.

Jayson
[Image: 36319488731_8f2a376549_z.jpg]
73 Mach 1 Mustang
89 Dodge Shadow ES
94 Jeep Wrangler

  Reply
#9
Sounds Great, Congrats!

mike

[Image: 1_11_11_13_11_50_27.png]
  Reply
#10
Thanks, ya very excited

"Do it once, do it right!"
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351C M-Code engine Timing issue! Meyer 25 433 Today, 08:41 AM
Last Post: Stanglover
  Engine buffs: why do our engines need to warm up? Vinnie 20 495 06-03-2018, 03:58 PM
Last Post: Don C
  Any good engine builders in my area? 73' mach 1 7 314 05-21-2018, 11:51 AM
Last Post: 73' mach 1
  Performance Part 302 engine Cresee 7 326 05-12-2018, 06:12 PM
Last Post: Ed Raver
  Engine mount orientation CalgaryChris 34 1,122 04-06-2018, 05:05 AM
Last Post: EBSTANG
  Engine Build Complete EdM 5 391 04-03-2018, 08:53 PM
Last Post: EdM
  Plug wire and firing order??? scgamecock 12 356 03-25-2018, 11:48 AM
Last Post: scgamecock
  Which Engine Block Plate is Correct for a 351C? I have three different plates. 4mm 6 675 02-26-2018, 09:03 AM
Last Post: Hemikiller



Users browsing this thread: 1 Guest(s)