• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Electrical issue, won't start justs makes one "click" noise
#31
You never did say what carburetor you have. Carburetors have two idle speed adjustments, the primary idle speed and the fast idle speed screw. The fast idle works off the choke fast idle cam, which may be stuck in the fast idle position, or the fast idle screw is turned in too far.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#32
(01-04-2019, 08:04 PM)Don C Wrote: You never did say what carburetor you have. Carburetors have two idle speed adjustments, the primary idle speed and the fast idle speed screw. The fast idle works off the choke fast idle cam, which may be stuck in the fast idle position, or the fast idle screw is turned in too far.

I have a Holley 4412 500cfm 2bbl carb.  I will go ahead figure out how to adjust those properly and then update again, thanks!
  Reply
#33
SOLVED

the fast idle adjustment was way out of wack and so after adjusting that and some more adjustments on the choke and mixture screws its finally back on its wheels after almost 2 years of sitting. Thanks everyone for the help!
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  car seems to struggle to crank and turn over at start up MustangNJ 9 305 08-08-2019, 01:03 PM
Last Post: MustangNJ
  oops, lost all electrical power, what did I break? MustangNJ 9 163 08-03-2019, 04:54 PM
Last Post: MustangNJ
runninpony Neutral Safety Switch issue Don614856 2 239 03-25-2019, 03:43 AM
Last Post: rackerm
  Wind Noise wdills 14 815 11-16-2018, 10:49 AM
Last Post: Mister 4x4
arrow Lighting Issue Don614856 12 584 09-19-2018, 05:59 PM
Last Post: NOT A T5
Stop Starting issue Don614856 6 416 09-17-2018, 11:49 AM
Last Post: Hemikiller
  Electrical Question mds1973 4 592 05-28-2018, 12:19 PM
Last Post: mds1973
  Rearend noise when cold? Anderslober 4 604 10-02-2016, 11:42 AM
Last Post: c9zx



Users browsing this thread: 1 Guest(s)