• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E7TE 302 Heads
#1
I came across a set of E7TE 302 heads that had a valve job done and appear to be in mint condition.  Question for you guys.  Will they bolt on to a 1968 stock 302?  These heads have the factory fulcrum rockers & studs etc.  
Let me know your thoughts and suggestions..
Thanks
[Image: E7_TE_Heads.jpg]
[Image: Top_End_With_Rockers.jpg]




[Image: Block_Side.jpg]

The person who says it cannot be done should not interrupt the person doing it. 
  Reply
#2
The Ford small block head bolt pattern never changed so most heads interchange.

How do the combustion chamber sizes compare as this would control your compression ratio.

It would also be necessary to double check your push rod lengths too.

I am probably forgetting something important, hopefully others will
Chime in.
  Reply
#3
They should fit, but you will have to check the pushrods, I think the length may be different.

Performance-wise they'll be about the same as stock '68 heads.

If you're looking for a performance upgrade look for GT-40 or 40P heads.

Edit: the one advantage of the E7 heads is hardened valve seats for unleaded gas.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#4
Sweet!!!!... Thank guys..

The person who says it cannot be done should not interrupt the person doing it. 
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351 cleveland mild build 2v heads Pastorpat 30 3,633 6 hours ago
Last Post: barnett468
  73 302 ro 351w swap now transmission noise samckay 14 352 01-19-2019, 09:51 AM
Last Post: boilermaster
  3514v closed chamber Aussie heads vs north american BB72mach1 8 363 01-17-2019, 04:07 PM
Last Post: Carolina_Mountain_Mustangs
Wrench Ford 302 Main Cap bolts Stang1972 4 182 01-11-2019, 10:56 AM
Last Post: c9zx
  302 engine identification & specs rjpohl 5 166 01-10-2019, 08:22 PM
Last Post: Hemikiller
  Can I assemble my own heads? scgamecock 9 475 11-20-2018, 11:30 AM
Last Post: barnett468
  What to do to 351c 4v heads? scgamecock 45 1,705 11-19-2018, 09:27 PM
Last Post: jpaz
  71 vert dual exhaust, longtube header, 302 2V, reinforcement torque plate 1971V8 11 494 09-29-2018, 09:53 AM
Last Post: c9zx



Users browsing this thread: 1 Guest(s)