• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
dynacorn and 1971-1973 Mustang
#1
Hi any of you folks out there know if Dyacorn is ever going to reproduce the full floor for 1971-1973 mustang. also a full quarter panel. I see over the past few years the 1971-1973 mustang body parts are becoming more popular. Two items would be great have when restoring these cars a full floor and full quarter panels. Thanks Ayp any thoughts
  Reply
#2
THere is probably not enough demand. IMHO.

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#3
On my wish list is the coupe deck filler panel between the trunk lid and rear window. I do think our years are becoming more popular though so maybe a chance.
  Reply
#4
Hello apysears,

Dynacorn has a Ask Joe section and here is one response to your question concerning full floor pans.

John asked:
"Hey joe, do you know what the status is for 71-73 mustang one piece floor pan? Someone asked you several months ago and your response was late summer. Thanks"
Joe answered on 10/18/2013:
Unfortunately, things get moved back and right now we do not have a new date.
Edit Record (Joe Only)

Source: http://www.dynacorn.com/JoeParts/ViewAns...x?qid=2191

mustang7173
  Reply
#5
Its all about demand, and the 71-73s just dont have the demand yet.
In wierd way, I like that. The new bodies for early Mustangs and Camaros from Dynacorn have given the big-money builders platforms to make some amazing cars, which keeps those bodystyles in the spotlight. The general public sees them all the time.
Our big ponies are fewer and far between, which makes sighting one of them a little more rare to the average Joe.
I know that at shows and cruises over the years, I have seen dozens of 65-66s and 69-70s, with 67-68s only slightly behind. But typically only a few 71-73s by comparison.
There are always the onlookers who say " Now THESE are the ones I have always liked best!"
I like the fact that a new 71-73 can't just be ordered and built from NOS and repro parts.
A dedicated owner of a big pony ( now thats an oxymoron!) needs patience, perseverance and dedication to get his steed in the state that just takes money for the other body styles.
Makes me appreciate them a little more.
  Reply
#6
Didn't I read somewhere that they are making a 71-73 convertible shell?

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
#7
aypsears;171842 Wrote:Hi any of you folks out there know if Dyacorn is ever going to reproduce the full floor for 1971-1973 mustang. also a full quarter panel. I see over the past few years the 1971-1973 mustang body parts are becoming more popular. Two items would be great have when restoring these cars a full floor and full quarter panels. Thanks Ayp any thoughts

I emailed the ask joe site concerning the full quarter panel and full floor. I will post it when I get an answer. Maybe some of the mustang dealer have an inside scoop on this issue?
  Reply
#8
dzstang71;171845 Wrote:On my wish list is the coupe deck filler panel between the trunk lid and rear window. I do think our years are becoming more popular though so maybe a chance.

That would be great if they would repo that section. I have two cars that have this area rusted out. I have been searching for a suitable replacement from a donor car and they are always rusted out as well. Right by the rear window in the corners!
  Reply
#9
Go to the Dynacorn website, Select "Mustang," then select "Year" (1971-1973), the check the 'New Items' box.

Full quarters are available (according to the website). No price and no pictures. But they should have some information about them by now in the Ask Joe section.

Eric

[Image: mach1sig2.gif]
  Reply
#10
Mister 4x4;175355 Wrote:Go to the Dynacorn website, Select "Mustang," then select "Year" (1971-1973), the check the 'New Items' box.

Full quarters are available (according to the website). No price and no pictures. But they should have some information about them by now in the Ask Joe section.

You can just order them from me Big Grin
Limited quanities at this time 479.95 + frt

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
Stang Dynacorn parts and measurements for chassis straightener Ballaratcastle 16 584 06-13-2018, 04:54 AM
Last Post: Ballaratcastle
  Dynacorn full floor pan? Carolina_Mountain_Mustangs 6 332 05-31-2018, 10:15 AM
Last Post: Carolina_Mountain_Mustangs
  2017 MUSTANG SIDE MIRRORS FOR 1971 MACH 1 Melfunctions 6 435 03-03-2018, 06:38 PM
Last Post: Melfunctions
  Hinge Rebuild Kit for 71-73 Mustang mustang7173 1 289 02-07-2018, 06:50 PM
Last Post: OzCoupe72
  Lower Trunk Corner Rebuild Dynacorn Darren 72 6 1,056 01-13-2018, 03:31 PM
Last Post: Darren 72
  1971 MUSTANG DYNACORN FULL QUARTER PANEL INSTALL aypsears 10 2,477 01-03-2018, 01:24 AM
Last Post: 302429c
  1971 - 1973 Coupe back glass closed cell foam seal mustang7173 1 355 11-14-2017, 08:01 AM
Last Post: mustang7173
  Roofrail Weatherstrip Guide Clip At Quarter Window Coupe/Fastback 1971-1973 mustang7173 2 445 09-13-2017, 10:22 AM
Last Post: mustang7173



Users browsing this thread: 1 Guest(s)