• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Duraspark II ignition
#11
You can do a hybrid system, where the coil is connected to the OEM resistor wire, and with a separate switched full 12 volt connected to the power feed for the Duraspark box.
Here's a link to another thread on the topic, post 3 has a writeup (not mine) with two wiring diagrams, one to use a Duraspark coil and the other to use the reduced voltage coil.
https://www.7173mustangs.com/showthread....#pid274660



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ignition resistor location jowens1126 5 221 05-22-2019, 04:36 PM
Last Post: jowens1126
bulb Electronic Ignition MechEng 38 10,268 11-21-2018, 02:35 AM
Last Post: Heardatbeat
  Any good ignition box mounting ideas? Bentworker 8 716 07-04-2018, 03:21 PM
Last Post: Mister 4x4
  351 C Ignition metalfan302 2 950 12-30-2017, 10:56 AM
Last Post: Stanglover
  On ignition timing Odmark 4 1,217 11-08-2017, 11:10 PM
Last Post: Spike Morelli
  Duraspark 2 boilermaster 12 1,830 08-04-2017, 09:06 PM
Last Post: Mikes73
  duraspark distributors boilermaster 21 2,614 07-16-2017, 08:12 AM
Last Post: Stanglover
  Timing/Ignition questions. Fredensborg 64 4,383 04-07-2017, 10:59 AM
Last Post: Twins



Users browsing this thread: 1 Guest(s)