• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Driver side mirror
#1

.jpg   s-l5006y.jpg (Size: 27.78 KB / Downloads: 110)      how do i unscrew the knob so I  can replace it with a new one, I try holding the outside and unscrewing the knob but all  its do is turn
  Reply
#2
https://www.7173mustangs.com/thread-driv...r-adjuster?



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
I read that, I don’t see my answer, he talked about drilling out a broken knob. I trying to unscrew the knob
  Reply
#4
Posted same question in my build thread 2 days ago...
I was told that Ford used to provide a drilling guide+how to with the knob.
Mine is broken and is basically just a tiny plug. Ordered a repro but no guide came with it.
So I guess I'll have to make one.

On the pict I see you have the old knob still in place, you could may be secure it in a vice while drilling on the other side?
That way it would not turn and you should be able to drill it out.

There are also bits available made to remove old broken studs using reverse rotation, but I don't know if they exist in this tiny size.

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#5
mine has the same mirror and it is threaded.. std right hand thread. i advise putting some penetrating oil on it first. my knob was broken so i had to drill and re-thread it. the new replacement knob was threaded too.
  Reply
#6
I just copied and pasted this from Fabrice's build thread (post #163):

Here are some basic instructions
https://www.hunker.com/13415526/how-to-e...ken-screws

In addition to what the article recommends left-hand (reversed) drill bits can bite in enough to remove them
https://www.amazon.com/slp/left-hand-dri...jv9mbea8ys

There are also mini-screw extractors
https://www.micromark.com/Mini-Extractor...driver-Set



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#7
ok, I take it that it won't unscrew, I must drill it out
  Reply
#8
Did you soak it with penetrating oil for a couple of days before trying to unscrew it? We're you able to get a good enough grip on the base?

It's possible the knob doesn't screw into (or out of) the OEMs. See this thread:
https://www.7173mustangs.com/thread-anyo...irror-knob?



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#9
Here are the Ford instructions to drill out and replace the knob. It has details on drill bit size and hole depth etc. if you have a broken adjustment knob on you LH remote mirror, you can drill out the old broken shaft and get a repro or look for the Ford repair and replacement mirror knob kit (D6AZ-17B718-A).

[Image: 20181112-161106.jpg]

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle
[Image: DSC_0266xsm.jpg]
[Image: satellite.png] Proud Space Junk Award Winner!












  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Rear View Mirror Replace Mirror Mac 7 272 04-08-2019, 12:43 PM
Last Post: Pegleg
  Side scoops/vent skeet76 32 1,043 02-27-2019, 05:05 PM
Last Post: skeet76
  Original Boss type side stripes Boss1Ray 16 544 01-26-2019, 09:12 AM
Last Post: OMS
  remote mirror bezel Copestang 5 275 01-19-2019, 11:12 AM
Last Post: MikeGriese
  Sport Mirror Questions JimB73 30 1,354 11-17-2018, 09:33 AM
Last Post: Stanglover
  Front side marker light bulb jowens1126 4 321 11-10-2018, 11:18 PM
Last Post: Ed Raver
runninpony Side Windows/Glass NOT A T5 9 490 09-18-2018, 09:22 AM
Last Post: Carolina_Mountain_Mustangs
  Anybody have a drivers side seat bottom frame? scgamecock 2 415 09-10-2018, 08:34 AM
Last Post: scgamecock



Users browsing this thread: 1 Guest(s)