• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Drip rail molding
#1
I want to buy L&R drip rail molding for 1972 fastback.
  Reply
#2
Check with our friends from Ohio mustang supply.If they don't have it they will point you in the right direction. Ask them a question right on this forum. Check the vendors forum.
Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#3
If OMS does not have them, you might want to check with NPD as they are carrying them in their catalog as Part Number 51726-7-4B. It does not show a price but is listed as "Call."

None of the other vendors (for whom I have catalogs) are showing the item as being available.

Hope this helps.

BT
  Reply
#4
NPD and other have shown the PN for almost 2 years. Dynacorn is the potential manufacturer. I contacted them directly and they could not tell me when if they are actually make them. So, if anyone can help me locate a set of good used moldings I would really appreciate it.
(10-12-2010, 04:56 PM)cobra3073 Wrote: If OMS does not have them, you might want to check with NPD as they are carrying them in their catalog as Part Number 51726-7-4B. It does not show a price but is listed as "Call."

None of the other vendors (for whom I have catalogs) are showing the item as being available.

Hope this helps.

BT
  Reply
#5
I sent in 2 original sets in 05 or 06 for them to work with, all 6 pieces for a fastback and a coupe set.
I received a test fit fastback sample set [ just the L & R outers ] from Dynacorn in Feb 2010
Did the test fitting, they were not right. Problems marked , tagged and they were sent back to be revised.
Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#6
(10-13-2010, 07:52 AM)OMS Wrote: I sent in 2 original sets in 05 or 06 for them to work with, all 6 pieces for a fastback and a coupe set.
I received a test fit fastback sample set [ just the L & R outers ] from Dynacorn in Feb 2010
Did the test fitting, they were not right. Problems marked , tagged and they were sent back to be revised.

I am also looking for these!!! I called Dynacorn and they told me that they are still in progress and that there is no date yet. These are the final piece to my restoration. Help me Dynacorn, you're my only hope!!!
  Reply
#7
I sent mine off to be re-chromed as well as the rest of the chrome on the car. They came back good as new.
  Reply
#8
Dayrer, I have some good used original ones
Don
email donwitt@ohiomustang.com
440 949 2556
Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Quarter panel molding/trim justford 0 190 06-03-2016, 11:57 PM
Last Post: justford
  Fastback rear window molding cigarguy 1 270 06-03-2016, 04:39 AM
Last Post: eddyw
  71 Mach 1 non strip body trim molding bdietz 3 742 02-20-2016, 12:14 PM
Last Post: Carolina_Mountain_Mustangs
  Interior A Pillar Molding PADave 4 413 10-29-2015, 07:18 PM
Last Post: PADave
  A-pillar molding Omie01 3 552 01-23-2015, 08:17 AM
Last Post: Omie01
  Original FB window molding trim F+R complete set eddyw 1 342 10-04-2013, 11:34 AM
Last Post: eddyw
  WTB 71 Deluxe Decor Lower Body Molding Piece mdan575 12 844 06-29-2013, 07:25 PM
Last Post: mdan575
  Wanted: kick panel and roofside garnish molding retainers Spechti 1 535 12-20-2012, 02:57 PM
Last Post: Spechti



Users browsing this thread: 1 Guest(s)