• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
door weatherstrip channel
I'm repairing my doors and the channel on the bottom (for weatherstip) to sit in is pretty rough, some edges are gone.  Is this channel/edge what holds seal in place or do you also use adhesive?  I'm looking at a couple replacement doors that the channel is in better condition, just don't know if it's worth the trouble (removing fenders and replacing doors).  I tried to add a few pics but couldn't get them to upload.
There was adhesive there also. I think the wavy flange that wraps around the rubber was there to help with gravity. The adhesive I use is 3-M weatherstrip adhesive. Put masking tape on both sides when you apply the adhesive to keep from getting on the paint where you do not want it.
Test fit it before adhesive and take your time.

When a man is in the woods and talks and no women are there is he still wrong??
does anyone know if you can purchase just the channel (bottom of door) and possibly remove existing channel pop rivet new ones on?
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  Door Window and regulator question vintageman 4 181 11-13-2018, 11:01 AM
Last Post: vintageman
  door jams, strip all the way down for color change??? scgamecock 5 228 10-27-2018, 08:16 AM
Last Post: scgamecock
runninpony Door-to-A Pillar Wiring Convolute BFH 429 21 819 08-04-2018, 07:46 AM
Last Post: BFH 429
  WeatherStrip vintageman 7 341 07-17-2018, 07:14 AM
Last Post: Bill73Ragtop
  Mach 1 Lower outside door trim/molding question Monterey 2 378 05-25-2018, 03:39 PM
Last Post: Mister 4x4
  Door/quarter weatherstrip with chrome Fabrice 0 342 05-25-2018, 09:48 AM
Last Post: Fabrice
  New Door Skins Heavy Metal 6 467 05-23-2018, 10:25 AM
Last Post: turtle5353
  Door hinges and Pin kit Fabrice 12 1,128 04-14-2018, 03:15 PM
Last Post: Fabrice

Users browsing this thread: 1 Guest(s)