• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
door panels
#1
I purchased a set of the reproduction deluxe door panels,and the look was ok but the fit was pitiful,had to massage the door panels for hours to get them to fit. Whisnane

Hidden Horses
  Reply
#2
Everytime I take mine off, I seem to lose a few of those clips. They never seem to work a second time and my panels are the original ones.

1973 Mach 1 - Medium Bright Yellow - (in restoration mode)
  Reply
#3
Yup had to do the same thing, I believe when they mold the plastic for the back of the panel it suffers from shrinkage. You always have to play with the length of some of the mounts for the clips in addition to cutting out all the holes for speakers or the door handle and cups.
  Reply
#4
whisnane;10044 Wrote:I purchased a set of the reproduction deluxe door panels,and the look was ok but the fit was pitiful,had to massage the door panels for hours to get them to fit. Whisnane

As soon as I'm done with the mechanical issues in front of me, I need to replace the door panels and do a few other cosmetic things. Which panels did you go with, and do you have a pic or two by chance?

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#5
The repops SUCK!!!!!!!!!!! No easy way to say it.
  Reply
#6
Well, there's certainly something to be said about honesty! :lmao:

What do you think, whisnane? How do they look to you?

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#7
73 Vertproject,The originals panels look much nicer,repops look ok,but after installing them ,I wondered if they were made to fit a studeabaker, Whisnane

Hidden Horses
  Reply
#8
whisnane;10134 Wrote:73 Vertproject,The originals panels look much nicer,repops look ok,but after installing them ,I wondered if they were made to fit a studeabaker, Whisnane

LOL! Tongue

Mine are so crappy, the Studebaker repops will probably look gorgeous! Big Grin

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#9
73vertproject;10067 Wrote:
whisnane;10044 Wrote:I purchased a set of the reproduction deluxe door panels,and the look was ok but the fit was pitiful,had to massage the door panels for hours to get them to fit. Whisnane

As soon as I'm done with the mechanical issues in front of me, I need to replace the door panels and do a few other cosmetic things. Which panels did you go with, and do you have a pic or two by chance?

Doc

Doc,I bought mine from the manufacturer located in Broadway Virgina .mustang market,but I dont know if all the deluxe panels come from here,They are supposed to be contours correct,but in my eyes for what? Whisnane

Hidden Horses
  Reply
#10
Tnfastbk;10088 Wrote:The repops SUCK!!!!!!!!!!! No easy way to say it.

+1 I have had two sets.The first ones I bought were around 1990 and they were terible! The last set fit a little better but not by much! If you can find some good cores,very hard to do, and send them out to Just Dashes etc.....that would be the best.The cost is going to be much greater also.I had my arm rest / console top redone by them and the work was second to none ! Cost about 200.00,and about six months later they started to repop them.


Attached Files Thumbnail(s)
   

[Image: 16kuyc0.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Interior Panels pwnedurass 5 163 7 minutes ago
Last Post: jowens1126
  Sunvisor clip and windscreen panels for Convertible Ballaratcastle 15 382 10-19-2018, 01:08 PM
Last Post: Ballaratcastle
  Door Sound/Heat Deadening EdM 8 313 10-14-2018, 04:39 AM
Last Post: goodnigh
runninpony Interior Quarter Panels NOT A T5 8 356 09-29-2018, 05:17 PM
Last Post: 71 gbvert
runninpony Interior Quarter Panels NOT A T5 4 362 09-11-2018, 04:28 PM
Last Post: NOT A T5
  Good price for these quarter trim panels? scgamecock 5 511 09-04-2018, 08:08 AM
Last Post: Carolina_Mountain_Mustangs
  door guts Copestang 9 545 08-24-2018, 10:52 PM
Last Post: batwrangler
  Door Jamb Vent Covers ITMike5.0 7 564 05-03-2018, 04:09 PM
Last Post: Mikes73



Users browsing this thread: 1 Guest(s)