• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Door Jamb Vent Covers
#1
Anybody ever buy these or have pics of them installed?  

http://www.mattsclassicbowties.com/conte...p5576.html

[Image: 71-73_mustang_door_jamb_vent_grills.jpg]
  Reply
#2
If they are made by Eddie Motorsports be careful. I bought the hood hinges and the cowl covers and neither were close to fitting properly. Very nice products but fitment was awful. But they returned my money without hesitation.
  Reply
#3
Why would you prefer these over the originals? Not criticizing, just don't understand.

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
#4
(05-02-2018, 03:30 PM)Jeff73Mach1 Wrote: Why would you prefer these over the originals?  Not criticizing, just don't understand.

Not really saying I prefer them...just keeping options open especially for plastic parts that tend to be cracked or fragile and very close to cracking if original.  I guess it all depends on whether or not I keep my car original and if I ever consider spending over $100 on a pair of vent covers.
  Reply
#5
couldn't find my originals, had to go with these. They fit fine and look good. Found the stock ones and decided to stick with these, more open air, a pop of chrome and color and they were already on.
  Reply
#6
Replaced mine too. Design wise not as exotic as these example, they do keep the original shape, but in line with my dashboard/theme of interior that is also using aluminium.
I still have to do/replace the original door speaker grilles.

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#7
Another part that could be reproduced!

Thanks,
mustang7173 Thankyouyellow

"Courage is being scared to death but saddling up anyway" -- John Wayne
  Reply
#8
I agree, they would sell alot of them.

351w - Ford racing GT40X 178 cc aluminum heads - Ford racing(crane) 1.7 roller rockers - Comp Cams 280H magnum cam .544" / .544" lift - ARP hardware - hedman longtubes - magnaflow exhaust with X pipe - Duraspark - MSD digital 6al box - MSD TFI coil - optima red top battery - tuff stuff 140 amp alternator - weiand stealth intake  - edelbrock 1406 600 carb  - march pullies and brackets - Be cool fan controller - derale electric fan - FMX trans - motive 4.11 gears - traction lok - lakewood traction bars.                                            










  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Polishing chrome on outside door handles Kilgon 8 302 9 hours ago
Last Post: Fabrice
  Door Trim Water shield mustang7173 6 184 08-07-2019, 09:50 AM
Last Post: Carolina_Mountain_Mustangs
  front sealing for rear door trim panel convertible 1971V8 4 203 07-22-2019, 06:08 AM
Last Post: mustang7173
  How to fix Fresh Air Vent Cable (or where to find new one) Iku64 2 138 07-09-2019, 05:29 AM
Last Post: Iku64
  What Goes Above My Center A/C Vent? EdM 6 394 05-07-2019, 09:53 PM
Last Post: secluff
  Rear "Trap" Door Releases EdM 2 268 05-06-2019, 11:08 PM
Last Post: EdM
  What company for door panels? scgamecock 11 623 04-13-2019, 07:57 AM
Last Post: MikeGriese
  How much to install seat covers and foam? scgamecock 22 704 04-12-2019, 10:12 PM
Last Post: kcmash



Users browsing this thread: 1 Guest(s)