• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Door Alignment help
Passengers door closed great before I added the door weatherstrip today. Now I cannot get tit to catch the second latch and close, even with a firm slam.

There is a lot of pressure from the seal as the door closes. Should I adjust the front of the door out using the hinge to door bolts, or leave it partially closed for a while and pray that the seal will compress?

THANKS for the help!

Were the body lines good before? How much gap in the hood to fender lines? If all these were right before, I would just pull the striker out just enough to latch and it will compress with a little time.

I just replaced my strikers and i was surprised how much i could adjust them without significant changes in the lines.

If you don't have time to do it right the first time, you sure as Hell don't have time to do it right the second time.

Dutch uncle
No Hood or front fenders on the car yet. The body lines were great at the rear 1/4 and the rocker panel.
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  Door jamb paint Newold 5 160 05-15-2019, 07:21 AM
Last Post: Newold
  Door hinge pin replacement. Tucaz520 6 214 04-29-2019, 08:30 AM
Last Post: rackerm
  Door sill area jpaz 5 330 01-18-2019, 11:59 AM
Last Post: jpaz
  door weatherstrip channel rjpohl 2 279 11-16-2018, 11:47 AM
Last Post: rjpohl
  Door Window and regulator question vintageman 4 317 11-13-2018, 11:01 AM
Last Post: vintageman
  door jams, strip all the way down for color change??? scgamecock 5 353 10-27-2018, 08:16 AM
Last Post: scgamecock
runninpony Door-to-A Pillar Wiring Convolute BFH 429 21 1,126 08-04-2018, 07:46 AM
Last Post: BFH 429
  trunk lid alignment/adjustment naa10104 13 1,424 06-10-2018, 05:23 PM
Last Post: rackerm

Users browsing this thread: 1 Guest(s)