• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dome Light Replacement
#1
Dumb question here but I need to swap the bulb in the subject light on my 73 Mach 1 and see nothing on it in the manuals. I have proven to to pretty solid breaking little tabs when doing such (just did it on my 17 Boxster S...). I assume I squeeze in the middle of the long sides and pull? TIA.
  Reply
#2
(11-07-2018, 08:47 PM)EdM Wrote: Dumb question here but I need to swap the bulb in the subject light on my 73 Mach 1 and see nothing on it in the manuals. I have proven to to pretty solid breaking little tabs when doing such (just did it on my 17 Boxster S...). I assume I squeeze in the middle of the long sides and pull? TIA.

Be careful when its brittle, squeeze softly in the middle of that white piece(maybe time for LED)


Attached Files Thumbnail(s)
   
  Reply
#3
I gave up on the 44mm bulb after placing my fourth new lens and went over to LED. All burned in the middle.
You can get these for pinuts a dozen on E-bay and gone is the heat.

I will prolly replace again with warmer colour later on or add a filter in between lens and LED if I can't find these in amber/yellow.
Thought the yellowish LED panel would be the light colour. Its not, instead its a really white light. Ideal to work in the car, just not as cosy inside as it was with the incandescent bulb. But the heat is gone, which is why I've changed in the first place. No more new lens every once in a while.

[Image: domelight.jpg]

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
[+] 1 user Likes Fabrice's post
  Reply
#4
Got it. Thanks. Yes, LED.
  Reply
#5
That’s what I did to. Now I can actually see inside my car at night with the dome light on.

run_horse Run Horse Run!
John 72 Q Code
  Reply
#6
I swapped in a dome light from an 82. Bronco. Nice and bright and has two separate switched lights on it. Mounts in the same holes.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
runninpony Clicking brake light relay NOT A T5 3 255 07-30-2019, 05:41 AM
Last Post: NOT A T5
  Light sockets Mwcopper 1 169 07-23-2019, 05:09 PM
Last Post: nailpounder
  Power Window Conversion or Replacement kit rackerm 3 314 06-26-2019, 01:14 PM
Last Post: Mister 4x4
  TURN SIGNAL AND BREAK LIGHT ISSUE 72mustang67gto 6 344 06-25-2019, 03:15 PM
Last Post: 72mustang67gto
  dome light Copestang 4 727 06-06-2019, 03:55 PM
Last Post: Copestang
  Dome light wire and where to plug Rmach1 4 410 05-21-2019, 11:03 AM
Last Post: Rmach1
Wrench Truck light wire routing path John J 0 227 05-19-2019, 09:01 PM
Last Post: John J
  license plate light jackf 3 310 03-27-2019, 12:21 PM
Last Post: jackf



Users browsing this thread: 1 Guest(s)