• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Does the ram air stay open
#1
all the time and when you press the pedal the two hood vents close ..im putting on one I got from cj pony and their open
  Reply
#2
(11-29-2018, 07:05 PM)batwrangler Wrote: on a 73

Your question is a bit vague. The ram air vacuum hose connects to a T connector on the vacuum hose leading to the air cleaner bi-metal valve on the underside of the air cleaner base. The other end runs up to the back of the hood and is routed to a T connector at the passenger side ram air flap actuator.

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle
[Image: DSC_0266xsm.jpg]
[Image: satellite.png] Proud Space Junk Award Winner!












  Reply
#3
(11-29-2018, 08:47 PM)rackerm Wrote:  
  Reply
#4
(11-29-2018, 10:16 PM)batwrangler Wrote:
(11-29-2018, 08:47 PM)rackerm Wrote: Two posts on the same subject going here.  Further to my comment on the other one, " rackerm "  says above to T into a vacuum line " going to the air cleaner ".   That's what you will see in the schematic layout.  Don't compromise the trans modulator or dist vac advance by diverting air when they need it most.  I have seen some that connect into the A / C canister tube from the small manifold block on the back off the intake ( brake booster off the top, smaller connections on the sides ) and this will not drain anything critical while providing the signal to the Ram Air actuators.
When you hook it all up, you can play with various options.
PKJ

 
  Reply
#5
(12-02-2018, 08:17 PM)6DUB606 Wrote:
(11-29-2018, 10:16 PM)batwrangler Wrote:
(11-29-2018, 08:47 PM)rackerm Wrote: Two posts on the same subject going here.  Further to my comment on the other one, " rackerm "  says above to T into a vacuum line " going to the air cleaner ".   That's what you will see in the schematic layout.  Don't compromise the trans modulator or dist vac advance by diverting air when they need it most.  I have seen some that connect into the A / C canister tube from the small manifold block on the back off the intake ( brake booster off the top, smaller connections on the sides ) and this will not drain anything critical while providing the signal to the Ram Air actuators.
When you hook it all up, you can play with various options.
PKJ

 

[Image: 71-73-MUstang-Nasa-Hood-Vacuuum-Diagram.jpg]


In the diagram above, #14 is the Vacuum Tree on the back of the intake manifold.  In stock configuration, this tree provides vacuum to the brake booster, A/C, Auto Trans modulator (by way of the plastic vacuum manifold on the firewall), Bi-metal valve & Air Cleaner Snorkel & ram air, EGR and PVS valve.


[Image: 73-Mustang-Cougar-AC-Vacuum-Diagram277.jpg]


[Image: Manifold-Vac-Hose-Fitting-Rrear-Labeled.jpg]
.
  Reply
#6
(12-02-2018, 08:17 PM)6DUB606 Wrote:
(11-29-2018, 10:16 PM)batwrangler Wrote:
(11-29-2018, 08:47 PM)rackerm Wrote: Two posts on the same subject going here.  Further to my comment on the other one, " rackerm "  says above to T into a vacuum line " going to the air cleaner ".   That's what you will see in the schematic layout.  Don't compromise the trans modulator or dist vac advance by diverting air when they need it most.  I have seen some that connect into the A / C canister tube from the small manifold block on the back off the intake ( brake booster off the top, smaller connections on the sides ) and this will not drain anything critical while providing the signal to the Ram Air actuators.
When you hook it all up, you can play with various options.
PKJ

 This is good stuff Thanks

THE WIND SHEILD COWBOY
  Reply
#7
(12-03-2018, 07:59 AM)rackerm Wrote: [Image: 71-73-MUstang-Nasa-Hood-Vacuuum-Diagram.jpg]


In the diagram above, #14 is the Vacuum Tree on the back of the intake manifold.  In stock configuration, this tree provides vacuum to the brake booster, A/C, Auto Trans modulator (by way of the plastic vacuum manifold on the firewall), Bi-metal valve & Air Cleaner Snorkel & ram air, EGR and PVS valve.


[Image: 73-Mustang-Cougar-AC-Vacuum-Diagram277.jpg]


[Image: Manifold-Vac-Hose-Fitting-Rrear-Labeled.jpg]
.

Thanks I did save the pictures soon as CJ Pony sends the rest I will connect it tx again

THE WIND SHEILD COWBOY
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Can you pop open a Sportdeck trunk access door from inside the interior? cudak888 40 5,843 02-23-2015, 08:41 PM
Last Post: cudak888
  Jimglo Open Trailer Ordered Mike429cj 21 2,079 01-17-2015, 09:18 AM
Last Post: Mike429cj
  Spring Open Car Show in San Antonio jhawk635 4 897 04-14-2014, 06:24 PM
Last Post: Lifizgud
  331 stroker open headers johndoe000 8 1,941 09-24-2012, 12:20 AM
Last Post: johndoe000
  73 mach 1 flip open gas cap question ze4operator 13 3,985 06-28-2012, 07:52 AM
Last Post: Tnfastbk



Users browsing this thread: 1 Guest(s)