• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
differential housing vent tube
#1
Does anyone know how the differential vent tube is routed and attached on 72 with dual exhaust?

Thanks, Chuck
  Reply
#2
C9 here is a pic of the routing. My mach has dual exhaust.
Jim


Attached Files Thumbnail(s)
   

drive it like you stole it
  Reply
#3
coilwire;15063 Wrote:C9 here is a pic of the routing. My mach has dual exhaust.
Jim
Jim, Thank you very much. The picture is great. Are those Koni shocks in the picture?

Thanks Again,
Chuck
  Reply
#4
Chuck, no Konis just Auto Zone specials.Rolleyes
Jim

drive it like you stole it
  Reply
#5
coilwire;15073 Wrote:Chuck, no Konis just Auto Zone specials.Rolleyes
Jim
Thanks. Just curious, another post was asking about shocks.

Chuck
  Reply
#6
Does anyone know if I can buy the housing vent tube as a kit? I've seen them for up to year 1970, but not listed specifically for 1971-1973.

thanks,
Bobby

1971 Mach 1, 351-4V M Code, Ram Air, C-6 Auto
2007 Shebly GT, 5-Speed, Performance White
  Reply
#7
sadlerb_98;18907 Wrote:Does anyone know if I can buy the housing vent tube as a kit? I've seen them for up to year 1970, but not listed specifically for 1971-1973.

thanks,
Bobby

Hi,

It's just a piece of hose , nothing special abouth that !?
Or do you want it to be concours correct ??

John

[Image: hvrju1.png]
  Reply
#8
Hi John,

I'm looking for concours correct. I have a hose there for the time being.

thanks,
Bobby

1971 Mach 1, 351-4V M Code, Ram Air, C-6 Auto
2007 Shebly GT, 5-Speed, Performance White
  Reply
#9
sadlerb_98;18926 Wrote:Hi John,

I'm looking for concours correct. I have a hose there for the time being.

thanks,
Bobby

Bobby, I used the 70 kit. The crimp clamp at the axle tube is correct, the bolt provided for the frame clamp threaded right into the existing hole. The grommet provided was not used. The 71 Ford shop manual, chassis volume, shows a drawing of it on page 15-10-11, FIG.15. It does not show a grommet being used. A chassis assembly manual may have more detailed information.

Good Luck,
Chuck
  Reply
#10
Thanks Chuck! I'll give that a try when I get back home.

Bobby

1971 Mach 1, 351-4V M Code, Ram Air, C-6 Auto
2007 Shebly GT, 5-Speed, Performance White
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  A/C vent replacement rudyck 2 332 04-22-2018, 09:50 AM
Last Post: rudyck
  COWL VENT GRILLES Kevin J 8 1,101 12-01-2016, 03:14 PM
Last Post: mustang7173
  FMX Transmission Leak Bell Housing parforever 11 3,774 11-16-2016, 12:49 PM
Last Post: mreddie72
  Rusted Press-in Heater Hose Tube 351 cigarguy 1 741 09-06-2016, 05:46 AM
Last Post: TommyK
  Search a Tube for a Air Filter on a 351 2V Duck 6 1,172 07-07-2016, 10:59 AM
Last Post: secluff
  Snapped thermostat-housing bolts Vinnie 72 8,201 05-25-2016, 08:13 AM
Last Post: jpaz
  Oil Dipstick Tube ejnonamaker 4 802 05-20-2016, 10:00 PM
Last Post: ejnonamaker
  Dipstick tube vozaday 6 988 04-07-2016, 02:33 PM
Last Post: clevelandcoupe



Users browsing this thread: 1 Guest(s)