• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Decor group molding set on ebay
#1
For the people with missing decor molding parts or wishing to install a complete set of decor molding.
The seller sells some of the parts separate as well...


1971/1972 Decor group molding set. Not cheap but new (reproduction). I've ordered 1 set from this seller before and the protective packaging was perfect so you don't have to worry with (international) postage.



http://www.ebay.com/itm/1971-1973-MUSTAN...93?vxp=mtr
  Reply
#2
Good to see... now I wish someone would reproduce the upper/lower chrome trim (two piece) for the non Mach1 rear blackout appliqué at the gas cap. You can easily find the pieces for the Mach 1 gas cap (I have a brand new set), but the easier to reproduce standard gas cap set, nothing... The search continues.
  Reply
#3
JD79;287919 Wrote:For the people with missing decor molding parts or wishing to install a complete set of decor molding.
The seller sells some of the parts separate as well...


1971/1972 Decor group molding set. Not cheap but new (reproduction). I've ordered 1 set from this seller before and the protective packaging was perfect so you don't have to worry with (international) postage.



http://www.ebay.com/itm/1971-1973-MUSTAN...93?vxp=mtr

Your description of 71/72 is correct, but their listing is wrong including 73. The difference is the two short front pieces that are different on the 73 because of the different bumper. The other 8 pieces do work on the 73.



Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06


[Image: 20180127_082009.jpg]

upload a photo on internet




  Reply
#4
I'll start by saying no, I'm not on Don's payroll as a salesman! (Lol) But before you spend almost $400 on this molding I would check with him to see what he knows about this offering. There was a set offered by NPD at one time that was as expensive and was paper thin and about near junk as the repo rear window moldings. If this is indeed a new and improved offering actually made in the US then it may be worth the price. My red Mach1 (Money Pit#2) sure could use a set! I do like how the ad closes by saying "THIS IS AN EXACT COPY OF THE ORIGINAL MOLDINGS ISSUED BY CHRYSLER"!

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#5
It's also interesting that the compatibility search engine starts off listing a whole bunch of 71 dodge challengers as being compatible. Strange.
  Reply
#6
secluff;287932 Wrote:I'll start by saying no, I'm not on Don's payroll as a salesman! (Lol) But before you spend almost $400 on this molding I would check with him to see what he knows about this offering. There was a set offered by NPD at one time that was as expensive and was paper thin and about near junk as the repo rear window moldings. If this is indeed a new and improved offering actually made in the US then it may be worth the price. My red Mach1 (Money Pit#2) sure could use a set! I do like how the ad closes by saying "THIS IS AN EXACT COPY OF THE ORIGINAL MOLDINGS ISSUED BY CHRYSLER"!

This is the same guy who has made them on and off for several years
He mainly makes mopar parts.
Someone on ebay has a couple of quarter panel and fender moldings - they say are NOS for OK money
  Reply
#7
Pastel Blue;287920 Wrote:Good to see... now I wish someone would reproduce the upper/lower chrome trim (two piece) for the non Mach1 rear blackout appliqué at the gas cap. You can easily find the pieces for the Mach 1 gas cap (I have a brand new set), but the easier to reproduce standard gas cap set, nothing... The search continues.

Ken, unfortunately the non Mach1 moldings were slow sellers and didn't stay in the parts system as long as the ones for the honeycomb panel. Everyone wanted the look with the Mach1 panel and fuel cap, so those moldings were a very good seller for years.
I searched by part number and found a couple of possibilities. I don't have a lot of business experience with them since there was a dedicated locator system I used that was just for dealers. So I don't know how accurate their inventory is.
The upper molding is D1ZZ-65423A82-A http://www.rearcounter.com/D1ZZ-65423A82...82165.html
The lower molding is D1ZZ-65423A84-A http://www.rearcounter.com/D1ZZ-65423A84...38932.html
At least there is contact info and some quantity showing at the different venders.
Hopefully they will at least have one good set you can use. Good luck!

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#8
And the ad incorrectly mentions Boss 351's.

Not correct for ANY 1971 or 1972 Mustang originally equipped with side stripes!

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  71 On eBay Newold 2 293 12-18-2018, 09:41 AM
Last Post: Ron Tanzi
arrow 1973 PW set up waterlife 1 327 08-05-2018, 08:34 AM
Last Post: Carolina_Mountain_Mustangs
  71 "429" coupe on eBay Hemikiller 9 622 06-20-2018, 09:03 PM
Last Post: John J
  SOLD: Selling 2nd Set of Sport Wheel Covers OLE PONY 1 552 04-26-2018, 10:09 PM
Last Post: OLE PONY
  72 Mach 1 on Ebay cristobal33 11 905 04-20-2018, 07:22 PM
Last Post: jpaz
  1971 Mach 1 project 429 (C-code) on EBay classicsguy 0 536 03-12-2018, 11:35 AM
Last Post: classicsguy
  12k mile 72 Q code/auto conv for sale ebay Boss1Ray 18 1,890 03-11-2018, 06:39 PM
Last Post: kevken1959
  TILT COLUMN ON EBAY Horsin' Around 2 414 01-16-2018, 06:23 PM
Last Post: Mister 4x4



Users browsing this thread: 1 Guest(s)