• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
dash lights
#1
Can anyone tell me how to check my dash lights while I have my dash on the work bench? Proper voltage and where to ground.  Thanks
  Reply
#2
cuedog10 Wrote:Can anyone tell me how to check my dash lights while I have my dash on the work bench? Proper voltage and where to ground.  Thanks
I Used a simple 9 volt battery and two leads.  Had no problems and I did not burn out the lights.
if you have LED's, I used the same 9 volt and extended the small wires off the bulbs and touched the contacts.  you may have to switch the wires around from the battery posts, as it will only light one way.

that's the simplest way I found.


[url=https://ibb.co/zJRhDQJ][/url]
[+] 1 user Likes Parkka's post
  Reply
#3
(10-30-2019, 03:05 PM)Parkka Wrote:
cuedog10 Wrote:Can anyone tell me how to check my dash lights while I have my dash on the work bench? Proper voltage and where to ground.  Thanks
I Used a simple 9 volt battery and two leads.  Had no problems and I did not burn out the lights.
if you have LED's, I used the same 9 volt and extended the small wires off the bulbs and touched the contacts.  you may have to switch the wires around from the battery posts, as it will only light one way.

that's the simplest way I found.
Thank You
  Reply
#4
This thread might help
https://www.7173mustangs.com/thread-got-...-the-bulbs?



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
[+] 1 user Likes Don C's post
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Dash Light Reflection Kilgon 5 381 12-12-2019, 09:35 AM
Last Post: Stanglover
  Only the DASH Illumination Lights don't work Parkka 22 1,150 08-22-2019, 02:29 PM
Last Post: Machvince
  Under Dash Wiring Mystery Mark73mach1 7 947 08-02-2019, 09:44 PM
Last Post: midlife
  Back up lights jt.db 4 351 07-22-2019, 10:43 AM
Last Post: Carolina_Mountain_Mustangs
  Please Identify Dash Cluster Lights jackf 17 784 07-11-2019, 08:05 AM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)