• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Correct appearance of trunk side of tail light panel
#1
Trying posting this here from my build thread:

I am currently working on fixing rust issues in the trunk and inner fenders. As I ready to paint the trunk area I am curious on how the trunk side of the tail light panel it's supposed to look from factory - this is a hard picture to find since it has to be taken from inside the trunk. By no means I am performing a rotisserie restoration, but I would like to approximate as close as possible within my capabilities. After repairs, grinding, cleaning, prepping, I am covering the trunk floor with Rust Bullet, beadliner coating and trunk paint, but I don't know how the inside of the tail light panel is painted, how the center support of the panel is painted and how the trunk lock bracket is painted. Also, if someone has a picture of the trunk seal groove (without seal) where it meets the inside of the trunk it would be appreciated.

Another question, I have seen the exterior side of some tail light panels painted black, was this an option, or just customization?



This is what I am calling the trunk side or inside of the tail light panel:

[Image: 20170102_215518_resized.jpg]


imagehost ru


        [Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
4-wheel disc brakes
  Reply
#2
Here are a couple

73 untouched convertible:

   

My car:

   

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#3
(03-01-2017, 05:29 PM)bkdunha Wrote: Here are a couple

73 untouched convertible:


Thank you, what color is the convertible?

        [Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
4-wheel disc brakes
  Reply
#4
The color is blue

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#5
This maybe a little over kill. I sprayed mine lizard skin sound/heat control then sprayed it with duplicolor gray/black spakel paint.

   

   

   

- Mike
  Reply
#6
(03-02-2017, 12:50 AM)mach71351c Wrote: This maybe a little over kill. I sprayed mine lizard skin sound/heat control then sprayed it with duplicolor gray/black spakel paint.
This looks awesome. Did you spray the whole inside of the tail light panel with duplicolor? In the trunk where is the limit between trunk paint and exterior paint?

1971 M-code Mach 1

        [Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
4-wheel disc brakes
  Reply
#7
Damn, that looks SO sexy, Mike. thumb

BK - blue?  Really?!  With all that gold glow inside the trunk? whistling


Those all look awesome, Gentlemen!  Thanks for sharing!  Coolphotos

Eric

[Image: mach1sig2.gif]
  Reply
#8
Thanks guys! I pretty much sprayed the hole inside of the trunk.

- Mike
  Reply
#9
(03-02-2017, 12:50 AM)mach71351c Wrote: This maybe a little over kill. I sprayed mine lizard skin sound/heat control then sprayed it with duplicolor gray/black spakel paint.
I am doing the 71 in a similar fashion. I used U-pols multiliner inside the trunk area. Once the car is painted I will top coat it with the speckle trunk paint.
[Image: IMG_0510.jpg]

free html images

[Image: IMG_0509.jpg]

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply
#10
(03-07-2017, 07:01 AM)turtle5353 Wrote:
(03-02-2017, 12:50 AM)mach71351c Wrote: This maybe a little over kill. I sprayed mine lizard skin sound/heat control then sprayed it with duplicolor gray/black spakel paint.
I am doing the 71 in a similar fashion. I used U-pols multiliner inside the trunk area. Once the car is painted I will top coat it with the speckle trunk paint.

Upol is my next step. I got the idea of using this product from your thread.


1971 M-code Mach 1

        [Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
4-wheel disc brakes
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  quarter panel patching jt.db 14 491 01-07-2019, 01:41 PM
Last Post: jt.db
  Trunk Seal jowens1126 5 165 01-02-2019, 01:52 PM
Last Post: jowens1126
  Torsion Bars Trunk Convertible - dealer added spoiler too heavy timachone 37 1,220 12-27-2018, 11:13 AM
Last Post: timachone
  Aftermarket panel fitment Omie01 1 204 12-13-2018, 08:09 AM
Last Post: JRANGER
  Tail light black paint question vintageman 11 456 11-10-2018, 09:00 AM
Last Post: Carolina_Mountain_Mustangs
runninpony Dynacorn 1/4 panel NOT A T5 5 413 09-16-2018, 05:57 AM
Last Post: NOT A T5
  Starting the floor/Trunk + fuel system rebuild jt.db 5 519 08-24-2018, 05:17 PM
Last Post: kusanagi
  71 trunk lid and quarter extensdions Ryunker 6 642 07-22-2018, 07:44 AM
Last Post: Hemikiller



Users browsing this thread: 1 Guest(s)