• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Correct 351C Power Steering Hoses?
#1
Hey all, 

I’m looking to buy new power steering hoses for a 351C, and I haven’t had any luck in finding some, wondering if anyone had any links or knows any keywords i should look up? Just reply below, thanks!!!!
  Reply
#2
Rock Auto has a good selection of hoses if you're not needing "concourse" style repops with the Ford part #s.

Pressure hose

https://www.rockauto.com/en/catalog/ford...+hose,7320

Return hose

https://www.rockauto.com/en/catalog/ford...+hose,7324


  Reply
#3
Whatever you do don’t buy Scott Drake hoses, they are junk! Had a relatively new one blow apart on me when I was making a turn. Almost hit another car and had atf all over my perfectly clean engine compartment.  Angry

run_horse Run Horse Run!
John 72 Q Code
  Reply
#4
Keep in mind if you are looking for the adapter from the pump to the pressure line (pictured below) they do not make them. You can try to find a used one or make your own.


[Image: 1349280032_v.jpg]

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
[+] 1 user Likes 73pony's post
  Reply
#5
I bought my replacement lines from Autozone. Wasn’t worried about getting the Ford part number for the replacement. They have worked great so far.
  Reply
#6
And the metal line that 73pony has pictured was missing on my car. Someone had used a high pressure line off of a 250, which will work without the metal extension tube, but rubs against the master cylinder.

The metal tube that is pictured, I ordered from West Coast Cougar. They sell good, used, hard to find parts. I highly recommend them.


Sent from my iPhone using Tapatalk
  Reply
#7
(08-09-2018, 11:31 PM)street rod mach 1 Wrote: Hey all, 

I’m looking to buy new power steering hoses for a 351C, and I haven’t had any luck in finding some, wondering if anyone had any links or knows any keywords i should look up? Just reply below, thanks!!!!

 71's are the long pressure hose that goes up on top of the shock tower brace. 72 and 3's are the short hose. But that may not be a concern to you. I got mine form NPD, but no idea who made them. Had no issues thus far, maybe I should check out what is available elsewhere.
Geoff
  Reply
#8
runninpony 
Bad Scott Drake parts again, who would have known? Just ill fitting JUNK!

71-73 Mustangs never die, they just go faster!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Any tips for removing power steering pump ? baz70 8 94 2 hours ago
Last Post: Stanglover
  351C 4V with manifolds wrobinson 4 118 Yesterday, 08:50 PM
Last Post: Don C
  Got another problem 351c batwrangler 26 1,183 Yesterday, 07:48 PM
Last Post: batwrangler
  351C 4V / C6 auto trans removal advice needed baz70 16 300 02-12-2019, 06:53 PM
Last Post: tony-muscle
  kick down lever/steering lock rod/ trans linkage naa10104 4 317 01-18-2019, 03:33 PM
Last Post: naa10104
  1971 351C 2V Intake and carb question. turtle5353 42 1,305 01-12-2019, 09:13 AM
Last Post: Ron Tanzi
  Tim meyer 351c thermostat and restrictor plate EvilPuppetMaster 11 511 12-30-2018, 08:27 AM
Last Post: EBSTANG
  351C Stumbling at low RPM TheDude 21 731 12-19-2018, 11:53 AM
Last Post: barnett468



Users browsing this thread: 1 Guest(s)