• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Copper wash at caliper
#1
I am leaking brake fluid at the front caliper banjo bolt. Does the copper washer go between the flex hose block and the caliper mating surface or between the bolt head and the flex hose block or both?

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#2
2 crush washers one each side of block
  Reply
#3
+1. Both sides.
  Reply
#4
+ 2 on both sides. I had a hard time finding those and the copper washers at the rear end center section. Soft copper plumbing hardware washers work very well BTW.

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  single caliper v 4 piston ? nailpounder 5 371 04-29-2018, 02:13 PM
Last Post: Bentworker
  Wheel / Caliper Issues Bru 20 1,478 04-06-2018, 07:48 PM
Last Post: Bru
  Dumb question, how many sealing washers for brake hose to front caliper bolt? sciabola13 3 734 07-28-2017, 10:17 AM
Last Post: sciabola13
  Disc Brake Caliper "Stabilizer" Purpose EdM 2 663 12-02-2016, 06:28 PM
Last Post: EdM
  14 inch mag 500s and clearance issues brake caliper pposey 6 900 12-29-2015, 08:35 PM
Last Post: pposey
  OE Single Piston Caliper Upgrade mustang7173 13 2,875 10-21-2014, 02:40 PM
Last Post: tony-muscle
  front outboard brake caliper pad problem verona 6 1,182 03-09-2014, 06:15 AM
Last Post: OLE PONY
  Broke Caliper bolts blkulis 1 544 01-25-2014, 09:02 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)