• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
convertible interior qtr panels, new reproduction
#1

http://cgi.ebay.com/ebaymotors/1971-1972...0447049511

Curious if anyone has tried these. I would have to paint them white.

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#2
i have the fastback versions and they are garbage.

I've heard the convertible versions are not any better.
  Reply
#3
We also bought a set of fast back ones and H is right the royally SUCK
  Reply
#4
I was about to buy a set and heard from another vert owner that they sucked

[Image: 1_14_01_12_10_54_29.png]

Ken

73 Convertible 302-4v-3spd yellow /white int

08 Bullitt 4.6-5 spd black/black int


All I ask is a chance to prove that money can't make me happy
  Reply
#5
The 71-73 convertible and fastback ones are not that good.

Won't fit without cutting / trimming and are very thin. Front lip is wrong too.
  Reply
#6
i guess it should be noted, if you have a track car, and want a light interior, these quarter panels would fit the bill.

they are lighter then stock, and look similar, they do not have the metal re-enforcement like on the originals everything is molded out of nylon on them. For a driver they are garbage.
  Reply
#7
OMS;25728 Wrote:The 71-73 convertible and fastback ones are not that good.

Won't fit without cutting / trimming and are very thin. Front lip is wrong too.

Man words of a salesman........."The 71-73 convertible and fastback ones are not that good." Just say it THEY SUCK
  Reply
#8
I bought some from a donor car a few months ago and two days later I found the repros for less than I had paid for mine.
I was "not amused"!
But after reading these posts, I think I was pretty lucky getting original ones...

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
#9
Interesting that they are looked as so poorly. I am glad I didn't try buying any. I live in AZ, although Prescott Valley is a fair ways away from Phoenix. Maybe next time I head up north i will visit them. Have they received feedback that their product isn't desirable?

My original panels were covered in Vinyl using the same fabric as the delux door panels. It actually turned out pretty good and they made little 'arm rest' pieces for the flat horizonal part. This looked darn good for a long time but after a while it got kind of beat up. I wonder if I can just dye it.

i will take some pictures. It certainly isn't 'stock' but it turned out looking pretty good (10 year ago....)


'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#10
will e;25766 Wrote:Interesting that they are looked as so poorly. I am glad I didn't try buying any. I live in AZ, although Prescott Valley is a fair ways away from Phoenix. Maybe next time I head up north i will visit them. Have they received feedback that their product isn't desirable?

My original panels were covered in Vinyl using the same fabric as the delux door panels. It actually turned out pretty good and they made little 'arm rest' pieces for the flat horizonal part. This looked darn good for a long time but after a while it got kind of beat up. I wonder if I can just dye it.

i will take some pictures. It certainly isn't 'stock' but it turned out looking pretty good (10 year ago....)

I'd be interested in seeing pictures of them. I have thought about doing the same thing with mine.

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  1973 Coupe 1/4 interior panels mustang7173 10 483 07-02-2019, 07:22 AM
Last Post: mustang7173
  Avocado Interior 67aj 12 1,580 04-27-2019, 05:36 AM
Last Post: Pegleg
  Correct SEM Interior Color for Vermillion? mjlan 5 232 04-17-2019, 04:52 PM
Last Post: Boss1Ray
  What company for door panels? scgamecock 11 549 04-13-2019, 07:57 AM
Last Post: MikeGriese
  Is this a good price for seats and qtr trim pamel? scgamecock 4 240 04-04-2019, 10:51 AM
Last Post: scgamecock
  Opinion on installing interior before paint scgamecock 6 259 04-04-2019, 10:15 AM
Last Post: 73pony
  Trim Panels 1972Mach1 4 321 03-22-2019, 01:19 PM
Last Post: 1972Mach1
  Door panels Which are the best? NG8264723 3 312 03-21-2019, 09:25 PM
Last Post: AOCUSNRET



Users browsing this thread: 1 Guest(s)