71-73 Swag

  • New T-Shirt Design (Also coffee mugs and posters!) – read more!
  • Mach 1 Key Tags available (almost gone!) – read more
  • Convertible Key Tags available (limited supply) – read more
  • Coupe Key Tags available (only a few left) – read more

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Complete 1/4 roll up Mach window conversion parts
#1
Greetings,

Convert you fixed Mach 1 or Fastback 1/4 windows to roll ups.

I have a complete set of 1/4 window manual windows still mounted in my parts car. These 1/4 windows work perfectly. I will carefully remove, clean, and identify every nut, bolt, bracket, and clip and then package them up and ship them to you. I will also hold the car until you are sure that we did not miss anything.

**** This set has sold for $200.00 but I have one last set up for sale for the same price. ***

http://www.7173mustangs.com/thread-1971-...conversion

The only parts that you would need to supply are your Mach one glass and 2 new handles - (I will ship the old faded handles if you want)

PM me with what you think these are worth. I am not looking to make a killing on these and will sell them at a resonable price.

Thanks!

Paul of MO
  Reply
#2
Greetings,

I have the rear seat out and the side panels off. Everything is there and looks good. I also matched my convertible with the coupe pictures shown in the instructions to make certain that the glass mounting bracket is the same.

We do not want to mess with e-bay so lets try it here.

Post up your offers - I will have them out and ready to ship by the end of the week.

Also - if you need convertible parts or anything else let me know. Once the window regulators are gone and sucessfully installed by the buyer the car will go bye bye.

Thanks!

Paul
  Reply
#3
Sent you a pm. Thanks.
  Reply
#4
Did some years/models not roll down?

I thought the coupe/conv were the same and the Mach 1 was different.

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#5
We have only had Grandé's and Convertibles. The 1/4 windows always rolled down.

Apparently the Machs have fixed rear windows unless you opted for power windows. Strange.

They look much more wicked with all the glass rolled down.

- Paul
  Reply
#6
Hey Paul, my 73 Mach 1 has fixed windows and I heard these will work in my car. How much do you want, please leet me know. Thanks, Mark.
  Reply
#7
Paul of MO;31187 Wrote:We have only had Grandé's and Convertibles. The 1/4 windows always rolled down.

Apparently the Machs have fixed rear windows unless you opted for power windows. Strange.

They look much more wicked with all the glass rolled down.

- Paul

That is true, and not just Machs but the sportsroof models as well.
WF 73 Mach 1;31196 Wrote:Hey Paul, my 73 Mach 1 has fixed windows and I heard these will work in my car. How much do you want, please leet me know. Thanks, Mark.

Mark, check the wiki section here. One of the members (Flatback72) posted up a tutorial on how to convert to the roll-downs.

Steve



[Image: 25yvyp3.jpg]
  Reply
#8
WF 73 Mach 1;31196 Wrote:Hey Paul, my 73 Mach 1 has fixed windows and I heard these will work in my car. How much do you want, please leet me know. Thanks, Mark.

Mark,

I hope to make enough to purchase a new or decent 650 to 750 Holley for my 351C. Trades are also welcome. If you can get me a clean and ready to run carb I will trade. If not they sell for around 350 to 400 new. A member here paid just under $600 to have a set of regulators sent to Australia. Less rare here so less money here.

I have one offer for $200.00 but I need to get more if possible.

Thanks

-Paul

  Reply
#9
Hey Paul, how about $125 and a used Holley 600. It was on my old F100 up to a couple of years ago. I'm sure it could use a kit. Mark
  Reply
#10
WOW I must have forgot that about my 73 Mach 1.

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [FOR SALE] 1973 Mach 1 Parts MustangChris 4 346 04-18-2018, 10:02 PM
Last Post: kcmash
  351 H Code motor/trans complete trainey 2 171 04-08-2018, 12:13 PM
Last Post: trainey
  '71 OEM parts for sale MikeGriese 45 4,458 03-29-2018, 12:32 PM
Last Post: Mac
runninpony Mach 1 decor trim Remington 3 327 03-11-2018, 06:42 PM
Last Post: bdietz
  mach 1 exhaust tips libram 0 193 03-07-2018, 09:14 PM
Last Post: libram
  '66 and 72 random parts for sale Danno 1 237 03-04-2018, 07:45 PM
Last Post: RacerX
  !971 Mach 1 Parts For Sale-Cancelled 71 money pit 2 335 02-27-2018, 08:10 PM
Last Post: mrmolding
  71-73 mustang roll down quarter window conversion 7173Modstangs 8 1,893 02-27-2018, 05:13 PM
Last Post: Yenko



Users browsing this thread: 1 Guest(s)