• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Comp Magnum 290 roller
#1
Anyone running this cam or one similar? What's your thoughts on it.

http://www.summitracing.com/parts/CCA-CL32-541-8/

I ordered it up for my motor. Gonna run it with quench heads and torker intake.

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
#2
I am not running (and have not run) this cam but it is my understanding that it is best with a 4-speed or an automatic with 2500+ stall.

It should make for a very good street performer.

BT

Do the RIGHT thing.
  Reply
#3
If you contact comp cams directly they will guide you to an off the shelf cam or grind you a custom one just for what you want. Thats what I did and it was around the same price as an off the shelf one. They were very helpful, but before you call have in mind what you actually want it to do,ie.....rpm range,top or bottom end, etc....

http://www.compcams.com/DefaultWide.aspx...eSupport=1
Sorry did not read you had already ordered itBlush
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  magnum 500 old henry ford 2 202 03-01-2018, 12:05 AM
Last Post: old henry ford
  Comp cams xe274h 83slimer 0 310 09-12-2017, 08:22 AM
Last Post: 83slimer
  Comp Cams Hydraulic Roller Conversion question 73pony 31 2,220 06-08-2017, 06:07 AM
Last Post: turtle5353
  Comp Cams Camquest 73pony 33 1,607 12-27-2016, 06:47 PM
Last Post: clevelandcoupe
  Exhaust kit choice - 351C 2V and Hooker Comp Headers Sly_drums 12 4,241 12-26-2016, 10:15 AM
Last Post: Bill73Ragtop
  Noisy Roller Valve-train? Omie01 11 1,186 10-08-2016, 07:15 AM
Last Post: Omie01
  Headers: FPS, Hooker Comp, Sanderson? 351c 4v cazsper 13 2,841 01-11-2016, 10:13 PM
Last Post: 4mm
  Roller Rocker question Omie01 9 1,461 03-12-2015, 03:43 AM
Last Post: Austin Vert



Users browsing this thread: 1 Guest(s)