• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Closed chamber 4Vs
#1
Looking for a pair of quench 4Vs that don't cost a fortune. I'm planning on stainless valves, hardened seats, and screw in rocker studs, so they don't necessarily need to be freshly done.

What'cha got?

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
#2
Place a wanted ad here http://www.network54.com/Forum/215649/ You will get responses so be prepared to make the deal. You can try getfleeced.com/ebay if you get desperate. I recommend Ferrea SS valves, very good product. Chuck
  Reply
#3
The pivotal question:
What are you looking to spend?
You'll find bare stock virgin heads usually for $200-up, with the average going rate running around $300-350ish.
Depending on your finished goal, the machine work and associated hardware adds up very quickly... right up to or exceeding new aluminum, ready to run sets. Be careful.

Pete - MotoArts Decals and Signs
'71 Sportsroof 351C-4V/4-speed - FINALLY under construction - no, wait, on hold again...
'90 Mustang 7-Up 5.0 ragtop, rolling beater
'66 Sunbeam Tiger Mk.IA, survivor
  Reply
#4
I have a set of 4v uench heads. Send me your email info. I have picts of them. They are bare heads. Asking $350 for the set + shipping.
Jim

drive it like you stole it
  Reply
#5
MotoArts;41481 Wrote:The pivotal question:
What are you looking to spend?
You'll find bare stock virgin heads usually for $200-up, with the average going rate running around $300-350ish.
Depending on your finished goal, the machine work and associated hardware adds up very quickly... right up to or exceeding new aluminum, ready to run sets. Be careful.
Yeah, I know. I've been eyeing CHI 4Vs... Don't quite want to drop $2300 at the moment. I can get a deal on machine work and assemble myself.

coilwire;41483 Wrote:I have a set of 4v uench heads. Send me your email info. I have picts of them. They are bare heads. Asking $350 for the set + shipping.
Jim
PM sent.

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
#6
coilwire's heads are on their way to me.

Thanks all.

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  351C 4V Closed or Open Chambered Heads 73' mach 1 2 619 05-02-2016, 12:03 AM
Last Post: Jeff73Mach1
  Wanted 351-C 4V Quench Chamber Heads KT-69 1 506 12-11-2014, 09:14 PM
Last Post: 73 CJ
  4v closed chamber heads andresde71 15 1,911 01-10-2013, 10:08 AM
Last Post: mentalcase222



Users browsing this thread: 1 Guest(s)