• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Clip Part Number and Thickness
Topic:  Windshield and Backlight trim retainer clips.

I decided to buy some new clips when re-installing the rear window trim and front trim since the old ones were rusted, bent and loaded with butyl from the factory install.

Much to my surprise, the new clips were more than a bear to even slide on the pins around the rear glass.  I found I had to bend them to get them on and had a terribly frustrating time.  I decided to clean up one of my originals and compare them.  I have many originals from various parts collections and my tear down.  It appears that all of my "original clips" are measuring about .005 thick  where the new ones are about .017 thick material stock.

What is the Part number for the lighter weight clip, and where do I buy them?  Windshield time, and need to do this right!!

[Image: 0]

Attached Files
.jpg   Clip.jpg (Size: 17.41 KB / Downloads: 99)
kcmash, I had always used either Ford (D1AZ-6542413-B) or a retainer from Kent Automotive which supplied a lot of hardware that was no longer available from Ford. Since the Ford retainers are no longer available I would contact Don @ OMS and ask him if he has heard of anyone else having the type of problem your experiencing. He offers moulding retainer kits for the front and rear windows. I would trust the products he offers and to get an honest answer if there is a problem with a vendors part. After clicking on the link, scroll down to the bottom of the page and you will see items F-3503 and F-583. http://www.ohiomustang.com/store/item_li...&p=3&ps=10


No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
The kits I have are from AMK
The clips are green, most of the clips I see others selling are the black early model clips
The D1AZ-B clips replaced approximately four different earlier clips which were black. The D1AZ-B clips were green and remained so until early 2003 when Ford went to a red oxide color until discontinued. If shopping for some for one of my vehicles I would get the green coded clips from Don! If you do have a problem at least you have someone you can talk to that cares about his customers.


No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
After pulling some new packages of clips today March 1 -2017
They are now blackish grey- not the jet black like the generic 65 up clips
Did find a pack of green ones for a coupe on the back of the rack.
Not sure when the change was made but it had to be awhile ago.

Ohio Mustang Supply

[Image: oms_sig_banner.jpg]
Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
  Odd number / no spotwelds? Vinnie 18 586 04-24-2019, 01:27 AM
Last Post: Vinnie
  Body part goodnigh 7 421 09-07-2018, 07:20 PM
Last Post: goodnigh
  Roofrail Weatherstrip Guide Clip At Quarter Window Coupe/Fastback 1971-1973 mustang7173 2 832 09-13-2017, 10:22 AM
Last Post: mustang7173
  Name this Part Remington 2 693 08-08-2016, 09:17 AM
Last Post: Remington
  Need help to ifentifie a part Mexican 5 774 04-22-2016, 08:13 AM
Last Post: Mexican
  under hood light part number 71 mach1000 2 636 02-12-2015, 08:45 PM
Last Post: judge
  73 Mustang Under Rear Window Part salhi_aemr 4 789 12-09-2014, 04:04 PM
Last Post: jeff8877
  Help identifying a sheet metal part om the cowl Paul113 3 844 06-29-2014, 12:28 PM
Last Post: Mister 4x4

Users browsing this thread: 1 Guest(s)