• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cheaper Bellhousing Replace C9AA-6392-D
#1
Is there a cheap alternative to the C9AA-6392-D bellhousing for a 1971 Mustang? Maybe a truck 429/460 bellhousing? Thanks!
  Reply
#2
Yes,
The truck 429-460 bell housing can be used, which I did successfully myself. Depending on what year motor you are using, the flywheel could have to be clearanced or a spacer plate will need to be fabricated. I used an 85 460 which has a thicker flywheel due to balance than the early motors.
If you have any additional questions, let me know, we could talk.
Thanks, Jay
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Alignment of bellhousing to engine tony-muscle 0 176 09-12-2018, 01:50 PM
Last Post: tony-muscle
  Power Steering Pump Replace 1972 MACH, stock? andy72 9 590 05-17-2018, 12:05 PM
Last Post: Fabrice
  351C Stroker / TKO 600 bellhousing question tony-muscle 11 1,747 03-29-2018, 03:18 PM
Last Post: tony-muscle
  EFI's gets cheaper... Fabrice 1 498 10-30-2017, 10:36 PM
Last Post: BrewSTL
  Need C6 Transmission height (bellhousing) tony-muscle 7 759 10-01-2017, 12:03 AM
Last Post: tony-muscle
  Bellhousing C9 AA-6392/4 for 429 & Toploader Higgins56 3 671 09-04-2017, 12:29 PM
Last Post: Higgins56
  Throw Out Bearing Worn - Replace Whole Clutch? icejawa 15 1,265 08-04-2017, 08:33 AM
Last Post: Stanglover
  Lakewood Bellhousing info...FYI 73' mach 1 1 513 06-16-2016, 12:56 PM
Last Post: Jeff73Mach1



Users browsing this thread: 1 Guest(s)