• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Center Console Map Light Clone with LED
Update   thumb

I Decided to 3D print the map lights to make it easier to meet demand.

I've been perfecting the 3D model and print process and am near finalizing the product.

I hope to send the next prototype to 73 Pony by the weekend for fitment confirmation
in his car after I check it in mine.

I will be ordering more lenses for the map light from Don at OMS along with the bulbs sockets and switches
from ebay this week.

We are days away from a production run and I thank you for being patient!


[Image: 3_D_Map_Light.jpg]
Very nice! I think a lot of people will be interested. It is a shame that my Mustang convertible doesn't have the wires for it behind the delete plate in the console. Maybe a long wire with a battery in the glovebox for easy replacement could be an option.
I am interested as well!

1971 Mach 1 - 351-4V Ram Air, 4-Speed w/Hurst Shifter, 3.25 Standard, AC, Light Pewter Metallic, Original Magnum 500s
2011 GT/CS - MT-82 w/Hurst Shifter, 3.73, Security, Ingot Silver Metallic, Am Thunder Axlebacks, JLT Oil Separator, Blue Boss Coil Covers, Boss Front Splitter, Shaker Hood Scoop
I was about to volunteer my 3D printer for you. This is absolutely the way to go. Very interested.

Yea, Though I cruise through the valley of the Shadow of Rice, I will fear no Turbo, For Thine Torque art with me. Thy forged rods and crankshaft, they comfort me.

Thou preparest a strip before me in the presence of four cylinder enemies: thou anointest my heads with high octane; my quarter mile victories runneth over.

Surely Horsepower and RPM's shall follow me all the days of my life: and I will race on the streets and strips forever.
(04-16-2017, 09:34 PM)BrandonDindorf Wrote: I was about to volunteer my 3D printer for you. This is absolutely the way to go. Very interested.

Thanks I have the part finalized and production will begin this week.  I have several pre-orders to fill then they
will be available on ebay.

I would like one as well, let me know when and where to send money!

<img src="http://www.7173mustangs.com/gallery/1_12_09_14_10_32_45.png" />

- Nik
(04-19-2017, 04:42 PM)71_resurrection Wrote: I would like one as well, let me know when and where to send money!

PM sent

Got the prototype today from Rocket366. Dang. Very nice. Fit perfectly in the opening.
[Image: image.jpg]

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason

[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]

I notified the first five interested parties that I have a map light for them.

They can ship 5/13/17


[Image: 3D_ML1.jpg]

[Image: 3D_ML2.jpg]

[Image: 3DML3.jpg]
That looks very nice!

Let me check your shorts!

[Image: Flamicon2.jpg]

[Image: oldfart.png]
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  Does anyone have a few good pictures of a '73 4 speed console MustangNJ 4 206 04-22-2019, 10:56 AM
Last Post: Carolina_Mountain_Mustangs
  dash light bulb covers SteveO_71 14 488 04-11-2019, 07:16 AM
Last Post: Bill73Ragtop
  Marti Auto Works Service Center Museum Boss1Ray 4 755 06-20-2018, 02:57 PM
Last Post: DK73
  interior light in convert Nige 8 981 03-11-2018, 06:45 PM
Last Post: mudbilly
  Daniel Carpenter Tail Light Rubber Gaskets Pegleg 2 883 07-07-2017, 03:18 PM
Last Post: Carolina_Mountain_Mustangs
  LED lights and flashers. Polarity matters! NG8264723 0 740 06-22-2017, 11:05 AM
Last Post: NG8264723
  removal center console 72mustang 5 1,212 06-20-2017, 11:59 AM
Last Post: 72mustang
  FMX B&M Full Console and Moddiction mickus 1 753 09-04-2016, 02:46 AM
Last Post: mach71351c

Users browsing this thread: 1 Guest(s)