Poll: What style carpet for my '72 Mach conversion?
This poll is closed.
Standard Fastback Carpet in Black?
11.11%
1 11.11%
Mach 1 Carpet in Black with Black Inserts?
77.78%
7 77.78%
Mach 1 Carpet with Grey Inserts?
11.11%
1 11.11%
Total 9 vote(s) 100%
* You voted for this item. [Show Results]

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carpet opinions...To Mach or not to Mach
#1
Hey guys, I am in the process of changing my Ginger interior over to black. My carpet is in fair shape but will have to go. Now I have two choices in carpet to replace, standard black carpet and "Mach 1" style with the inserts that are on both passenger and driver side. My questions is what carpet type should I invest in? If I use floor mats (who doesn't?) I suppose it won't make a different anyway?

If I choose the Mach style carpet, I intend to go with Mach seat uphostery in either all black (black with black stripes) or black with grey striping. I am going to replace uphostery never the less and will likely use the Mach style ...

Ok, it appears the differences are not apparent (I guess I am more aware as I have researched them). Here are some examples, the green is standard (I would be using all black) and the black/grey then consider if the grey were black...


Attached Files Thumbnail(s)
       
1972 Fastback
Zinc Yellow / Black Trim

2006 GT Coupe - Mach 1 Tribute
Screaming Yellow / Black Trim


President
Central Missouri Mustang & Ford Club
  Reply
#2
I voted for black on black! You can always add gray floor mats if you want to lighten it up down there.
[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
1972 Coupe - 306cid/C4 Gold Glow (in restoration phase)
  Reply
#3
My vote is Mach 1 black on black. I like it but it is hard to keep clean.
[Image: 20r9ylt.jpg]
  Reply
#4
As ACDC would say BLACK ON BLACK OH WAIT IT'S BACK IN BLACK LOLTongue
Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#5
Another vote for Black on Black Mach 1 carpet. It's gonna be sweet, Man.

I'll be going with the same in mine as well, so I can't wait to see how yours turns out.
Eric

[Image: mach1sig2.gif]

See my Frankenstang Album on FB.
  Reply
#6
Black on black mach 1.
  Reply
#7
OK, this one was not even close. I bought the black on black... Big Grin
1972 Fastback
Zinc Yellow / Black Trim

2006 GT Coupe - Mach 1 Tribute
Screaming Yellow / Black Trim


President
Central Missouri Mustang & Ford Club
  Reply
#8
Mach, which yellow did you use on the '72?
Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#9
(12-11-2010, 08:45 PM)droptop73 Wrote: Mach, which yellow did you use on the '72?

I tried med Yellow but that was a bit too dark. I took my trunk off and went to Colormaster and had them analyze it to match. I don't know what color it would be but now I can get paint from them and it matches perfectly.
1972 Fastback
Zinc Yellow / Black Trim

2006 GT Coupe - Mach 1 Tribute
Screaming Yellow / Black Trim


President
Central Missouri Mustang & Ford Club
  Reply
#10
Cool, I have been thinking about changing to the '04 yellow for a little more "pop".
Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Just bought a 69 Mach 1 Thin Lizzy 29 706 04-09-2017, 12:10 AM
Last Post: 69 Rustang
  Looking for ac and heater ducts for my 72 Mach 1 72RAGE 5 254 04-07-2017, 11:32 PM
Last Post: kcmash
  Mach_One's J-Code Mach 1 Mod Thread Mach_One 10 447 04-04-2017, 11:43 PM
Last Post: Mach_One
  Just purchased 3 x Mach 1's... mickus 18 868 03-13-2017, 04:28 PM
Last Post: 72HCODE
  Help with Mach 1 purchase... mickus 5 287 03-12-2017, 04:51 AM
Last Post: luxstang
  Mach 1 Mustangs are not for overparking Flatback72 6 472 03-11-2017, 08:30 AM
Last Post: Flatback72
  73 Mach 1 Production Stats - Where did this come from? Steve73QMach1 15 486 03-09-2017, 10:13 AM
Last Post: Mister 4x4
  What is the max length on a Mach 1? rocketfoot 7 292 03-08-2017, 11:40 AM
Last Post: rocketfoot



Users browsing this thread: 1 Guest(s)