• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Canister hose fix
#1
Finally found sollution for evap hose from canister to air fiter housing. After unsuccessfull tries for a solution to replace evap hose, I found fix... Used a dishwasher drain hose fro Lowes and It looks great.

Alan L


Attached Files Thumbnail(s)
       

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#2
Very ingenious, Alan. And it looks pretty cool, too!

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#3
Looks good. Did you get it running yet?

[Image: 20r9ylt.jpg]
  Reply
#4
now that's thinking!!!! good job!!!
  Reply
#5
Nice work, ingenuity at its best!

Steve



[Image: 25yvyp3.jpg]
  Reply
#6
Not running yet. Sad, having trouble get gas up to the carb. Just replace tank and sender. Cranking not doing it, so will try feeding gas into carb to get RPM's up. Also weak spark..trying old coil and changed out shorted dist. pick up today.

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#7
just be careful with the heat under the hood it may melt
  Reply
#8
72HCODE;21982 Wrote:just be careful with the heat under the hood it may melt

Hey Alan,
Nice quick fix, but I'm affraid 72HCODE may be right. Check out Pre-heat duct hoses by Standard Products. I don't know the diameter size of the hose, but here are part numbers and size:
DH1 = 3/4" Diameter
DH3 = 1.5"
DH4 = 1.75"

$10 for 18" rolls.

  Reply
#9
I didn't think about the heat. VERY good point.

Steve



[Image: 25yvyp3.jpg]
  Reply
#10
Start up with new tank...I put in 5 gal of gas..cranked and cranked..no gas
put in another 5 gal and problem solved. I think it takes 5 gal just to wet the tank good !
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Fuel Vapor Canister NOT A T5 3 196 04-01-2018, 06:11 AM
Last Post: NOT A T5
Wrench exhaust shield and the heat riser hose on a Q code John J 16 1,158 03-09-2018, 01:39 PM
Last Post: Stanglover
  Heater hose port possibly clogged? Dreadknot 12 951 12-24-2017, 10:28 PM
Last Post: Dreadknot
  Heater hose firewall connection Danno 8 784 12-07-2017, 09:38 PM
Last Post: rackerm
  Anyone know the reason for the AC disconnect on the hose sdstang 1 272 12-03-2017, 09:19 AM
Last Post: 71_resurrection
  Info to Replacement-Part Air-Intake-Hose Duck 6 706 10-25-2017, 03:26 PM
Last Post: Stanglover
  A/C vacuum canister JD79 4 561 10-23-2017, 05:29 AM
Last Post: JD79
  vacuum hose routing, can i? sdstang 1 421 09-27-2017, 03:34 PM
Last Post: rackerm



Users browsing this thread: 1 Guest(s)