• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C6 transmission mount
#1
The mount front/back of the mount isn't symetrical. Which was do you install it?

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#2
With the "bulge" to the rear.

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#3
Thanks!

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#4
droptop73;162383 Wrote:With the "bulge" to the rear.

Bulge to the front if the car is a male Tongue couldn't resist...sorry Dodgy
  Reply
#5
caspianwendell;162472 Wrote:
droptop73;162383 Wrote:With the "bulge" to the rear.

Bulge to the front if the car is a male Tongue couldn't resist...sorry Dodgy

See now that makes sense.

Once I started messing with it the correct position became obvious.

'Mike'
73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
  Reply
#6
will e;162505 Wrote:
caspianwendell;162472 Wrote:
droptop73;162383 Wrote:With the "bulge" to the rear.

Bulge to the front if the car is a male Tongue couldn't resist...sorry Dodgy

See now that makes sense.

Once I started messing with it the correct position became obvious.

And I guess with a little lube it slipped right in? I better shut up or I'm gonna get in trouble Angel
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Engine mount orientation CalgaryChris 34 1,170 04-06-2018, 05:05 AM
Last Post: EBSTANG
  FMX Transmission casting number question? Monterey 6 329 03-01-2018, 11:45 AM
Last Post: Vicus
Wrench 3 speed to 4 speed manual transmission swap? waterlife 9 846 02-04-2018, 05:28 PM
Last Post: Carolina_Mountain_Mustangs
Wrench C6 transmission linkage questions jmassey6 16 2,249 10-25-2017, 07:39 PM
Last Post: rackerm
  1973 Mustang coupe transmission MarioAranda 2 327 10-09-2017, 07:19 AM
Last Post: delawarebill
  Need C6 Transmission height (bellhousing) tony-muscle 7 589 10-01-2017, 12:03 AM
Last Post: tony-muscle
  AOD transmission swap in Dallas ft worth toastintx 6 645 09-19-2017, 09:27 PM
Last Post: toastintx
  What transmission fluid for a rebuilt 1970 C6 ?????? pposey 9 820 09-18-2017, 07:41 PM
Last Post: pposey



Users browsing this thread: 1 Guest(s)